3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Fletch tape and arrow wraps?

Started by GMMAT, July 01, 2009, 04:40:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

VA Bowbender

QuoteOriginally posted by ishoot4thrills:
I don't understand why some are having trouble with tape and wraps. I use the Bohning tape with wraps and haven't had any problems. Maybe it's the stuff you're using to prep the shaft before using the tape. I use denatured alcohol exclusively. I'll bet those that are having trouble may be using rubbing alcohol instead. Don't use rubbing alcohol, as it has an oily residue it leaves behind as it dries. Use denatured alcohol ONLY!
I think you may be right about prepping the shaft.  I use lacquer thinner to clean the shaft first.  Now I just started using the tape and I'll have to see how the cold weather affects it.
Bows, Broadheads & Backstraps

Covey

I had AD trads that had been fletched with tape and never had a problem hot or cold! I shot the same arrows for over a year and hunted the late season without any trouble. I've been shooting 2117 with wraps and tape and no trouble! I use lacquer thinner on the shaft, roll on the wrap and stick the fletching ,little dab of glue and no prob's!! For what it's worth, Jason

Coop

QuoteOriginally posted by ishoot4thrills:
I'll bet those that are having trouble may be using rubbing alcohol instead. Don't use rubbing alcohol, as it has an oily residue it leaves behind as it dries. Use denatured alcohol ONLY!
I only use denatured alcohol, heck I don't even have anything else in the shop. Like I said, it could be my tape was old, I can't even remember when I bought it.
"Twenty years from now, you will be more disappointed by the things that you didn't do than by the ones you did do"

-Mike

vtmtnman

For woodies I fletch immediately after the poly has cured.I use acetone on bare aluminum and carbon shafts and dish soap and hot water over wraps and have had no issuses with the tape.I love the stuff,and I was probably the most skeptical of all about it.
>>>>--TGMM family of the bow--->

Tim Finley

I used denatured alcohol, they still came off when it got cold, glue works better, platinum on the carbons and duco on wood!!!

ishoot4thrills

I also run my fingernail down the side of the feather on the quill edge and apply pressure against it, pushing it onto the arrow better to assure a good adhesion. Is everyone else doin' this also?
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

VA Bowbender

How many brands of fletch tape are there? The only one I know of is Bohning.

I just pulled an arrow out of my target butt that almost passed through. The feathers were soaked and matted after 3 days of rain. Rather than steaming them I stripped them off to re-fletch. I had to use a razor to get all the tape off. I'm a true believer now.
Bows, Broadheads & Backstraps


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©