You CAN sharpen sharks with KME!!!!!

[Badwithabow]

That time of year I reckon last year I made a vid that was st a horrible angle this one is a lot better!
Pm me any ?s
http://i1082.photobucket.com/albums/j377/armucheelongbows/4c5adbe1.mp4

[Fletcher]

Thanks for sharing this, Brandon.        Not going to be quite as convenient when mounted on a wood shaft but will work just as well.  I'm looking forward to trying this technique and slipping an Interceptor between some ribs this fall.

[jonsimoneau]

Yep. I sharpen them with a KME. Works great.

[wigeon]

Thanks for the video I will have to give it a try

[Badwithabow]

TTt answered a few questions on this so pull it back up, just in case u cannot tell I still have the head in the jig on the strop this allows me to keep the same angle also I do have some yellow stone crushed up on my strop for good measure.

[Badwithabow]

im gonna throw this out there one more time since season is right around the corner....

[Night Wing]

That was a great video on how to sharpen a Simmons broadhead.       I've never shot Simmons heads because I could never get the curve of the head sharp.

In my opinion, this video should be made a Sticky because this method will work with other broadheads with similar design.

[KentuckyTJ]

Have you all tried one of the half moon shaped files and maybe a round ceramic stick. I would think that would be better than a flat one.

[Dirtybird]

If you buy the little sharpener off their website, it looks like two little wheels.  You can get sharks scary sharp in a matter of minutes.

[swampdrummer]

TJ, I tried the half moon files, Jewel stick and a smaller diamond stick and couldn't keep a consistent angle on the bevel. Of course,wasn't using the KME either! I can get the landsharks fairly sharp with a small flat file, 5" I think. Just picked up a RADA sharpener and in a matter of a couple of minutes I've gotten them to hair plowing sharp. Got bald spots all over my arms and legs to prove it too! LOL

[Badwithabow]

I'm not sayin this is the best/only way to sharpen a simmOns but instead just making use of what we have most are terrified of the simmons heads bc no one wants to drop more coin on special this n thats. This will make the kme perfect for any 2 blade heads.

[Dirtybird]

That wheelie they sell on their website is only $8.95 and can be used in the field for ease of transport.  The KME is a great sharpener I was just saying you can get them hair popping sharp with this inexpensive little tool.

[buckeye_hunter]

GREAT VIDEO!!!

 

[killinstuff]

I use my KME and the oval ceramic rod. Clamp the BH in, hold the KME in your left hand with the roller pointing up and work the ceramic rod. I start with sand paper wrapped around the rod to get that first edge and finish with the rod only. Works great

[Sirius Black]

I'm buying a KME this year!

[PTLMG]

That is awesome info

[Josh Perdue]

Thanks for posting, I just got my tigersharks pretty sharp. I thought I was gonna have to buy the kme knife sharpener.

[T Mowery]

Thanks Much! Was just getting ready to call Ron for a knife sharpener also,when I found your little jem. Tried it with a chain saw file, and they are scary sharp!
Great!

[Badwithabow]

It's fall y'all I'll bump this up for any new folks

[Charlie Lamb]

Good idea Brandon.