Bear td limbs

[Cherokee Scout]

Here are a few pictures of limbs made for my Bear takedown by Jim Gainey of Black Creek bows.

[Cherokee Scout]

[Cherokee Scout]

[Cherokee Scout]

[Cherokee Scout]

These limbs are #3s. He just finished a form to make #1s. You can use the fastflite strings on these limbs.

[Bjorn]

He does nice work!      

[cacciatore]

They look nice,any comparison with other limbs on the market?

[Cherokee Scout]

I shot these thru a chrono today. The bow had a dacron string. I shot two different weight arrows, one was 9.8 gr/lb and the other was 11.4 gr/lb.
The 9.8 arrow shot 173 fps and the 11.4 arrow shot 164 fps.
This is about 7-8 fps faster than my original Bear limbs using the same string. I did not try using a Fastflite string. I would guess that if I had used a Fastflite string the speed would be about 180 and 170 using the same two arrows. I will try a Fastflite string and shoot 8gr/lb to see what they will do. I expect that combo will get about 190 fps or so.
Jim's prices might be the lowest of any after market limb. His wait time is very short too! I saw another set he is making for another customer, these are clear glass limbs using zebrawood under the glass. They are going to look very nice. I will try to post pictures of them when he is finished.

[rjackson]

Hey John,Those look good. I talked to Jim this afternoon and ordered a set of #1 limbs.

Randy

[Blackhawk7204]

Pretty fast for less than 40#

[Cherokee Scout]

Bear limbs set beside the Black Creek limbs to compare the shape. The Black Creek limbs have the Yellow sting.

[Cherokee Scout]

The Bear limbs in this picture are the white limbs.

[vermonster13]

Sweet.

[JimB]

Those are nice.That's pretty good speed too.I would personally put a FF string on.Every bow I've used them on was quieter and handled better.probably a few FPS faster too.