What Quiver was Bear selling in 1967 for Super Kodiak bows?

[Tatersalad]

Trying to find the "age" appropriate quiver for a 1967 Super Kodiak.  Pics please....

Thanks

Michael

[JimB]

The 4 or 8 arrow Snap On,or "springarm" quivers in the longer length.

[cacciatore]

Super Kodiak 1971 with quiver.

[cacciatore]

You need the double long arms spring quiver.

[Tatersalad]

Cacciatore

Thanks i'll have to start watching the classifed for a doulbe long arms spring quiver.

Your second photo does not show up?

Thanks

Michael

[cacciatore]

It was up but it is desappeared???

[Tatersalad]

nice.  is there a specific model number or name for the double long arms spring quiver?  My luck i'll buy the double "medium" arm spring quiver...

Thanks again for the pics and nice SK!  What year is that...early 70's...that's futurewood right?

Michael

[reddogge]

They are all one length.  You adjust them up or down for long or short risers by the screw clamps.

[bear1336]

Felix
Nice bow and quiver they bring back a lot of good hunting memories to me.
Dave

[cacciatore]

I am sorry I live that far Dave, otherwise we could share our bows and most of mine are in the 45-50# range.
Michael,I get one still new in the box and ser.# is 3590 regular.

[DGEsposito]

I have two bear quivers 8arrow and a 4 arrow they only have one spring and the other end is attached with the stablizer screw in the stab hole

[ron w]

Those are the ones! Just like the ones I had in 68".

[JimB]

They are adjustable but they are not all one size.There are 3 sizes.Looking back at catalogs,Bear recomended the regular,L-640R.They later changed the catalog number to 3590R-same 8 arrow quiver.Make sure you determine if it is right or left hand,depending on which you need.The long model may also work but avoid the short model.I would try to find the regular and Bear specifically mentioned it for the Super Kodiak.

[cacciatore]

The box says for the bow with the bow quiver bushing,youy can use it also if you have a stabilizer bushing with the included insert.Serial # 3625. "screw on quiver"

[cacciatore]

If you have the stabilizer hole you can use the above one otherwise only the double spring arm.

[JimB]

The 67 1/2 Super Kodiak probably doesn't have quiver bushings or a stabilizer bushing unless someone added them.

If you get the 4 arrow,lether top,it is non-adjustible and you need the long.

[Tatersalad]

From the pics I've seen it has no quiver or stablizer bushings.  So the 8 arrow is adjustable but not the 4 arrow?

Michael

[stagetek]

They are not all one size. The 8 arrow came in 2 sizes, and the upper arm could be moved. The lower arm was short or long. The 4 arrow leather top came in 3 sizes and was not adjustable. Both the 4 and 8 arrow models are left/right hand specific.

[jcar315]

This is the "quiver page" out of the 1967 Bear catalog.

[/url] [/IMG]

[JimB]

That is correct,Tatersalad.The springarms are just welded to the wire frame of the 4 arrow.No adjustment.Again,there were 3 sizes,as the catalog page shows.Upper and lower arms were different lengths.