3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


« previous next »
Pages: [1]   Go Down

Author Topic: GT Nocks - want to replace  (Read 1160 times)

Offline BrownA5

  • Trad Bowhunter
  • **
  • Posts: 1268
GT Nocks - want to replace
« on: December 22, 2011, 12:18:00 PM »
I just purchased a dozen GT 3555 and am looking for recommendations on replacement nocks.  Thanks!
Logged

Offline AdAstraAiroh

  • Trad Bowhunter
  • **
  • Posts: 67
Re: GT Nocks - want to replace
« Reply #1 on: December 22, 2011, 12:27:00 PM »
I really like the newer Easton 3D Super Nocks.  They fit, are smaller in size than many others, and have been extrmemly durable for me.

Mark
Logged

Offline Ron Roehrick

  • Trad Bowhunter
  • **
  • Posts: 523
Re: GT Nocks - want to replace
« Reply #2 on: December 22, 2011, 12:29:00 PM »
I shoot longbows and recurves with GOLDTIPS and I prefer to use mercury speed nocks with an aluminum nock adaptors I order from black widow. If you happen to split a nock the pointed nock adaptor saves the arrow from spliting. I just like this style of nock they are very quick for a second follow up shot when useing a back quiver and with a dacron string they fit the servingon the string just about right.Just my preference, I am sure others on this site will have thier favorites nock type. Ron.
Logged

Offline Bud B.

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 7290
Re: GT Nocks - want to replace
« Reply #3 on: December 22, 2011, 01:58:00 PM »
Bohning Signature or the Easton's.
Logged
TGMM Family of the Bow >>>>---------->

"You can learn more about deer hunting with a bow and arrow in a week, than a gun hunter might learn all his life." ----- Fred Bear

Offline huntingarcher

  • Trad Bowhunter
  • **
  • Posts: 1020
Re: GT Nocks - want to replace
« Reply #4 on: December 22, 2011, 02:05:00 PM »
I also like the Bohning Signature nocks.
Logged
IF MONEY TALKS MINE SAYS GOODBY

Offline chopx2

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 953
Re: GT Nocks - want to replace
« Reply #5 on: December 22, 2011, 02:08:00 PM »
QAD Tune-a-nocks are great. they hold well and less serving/string thickness sensitive and if you flirt with Extreem FOC they only weigh 4.5gr (about half to a third of a standard nock) and can increase your FOC by almost 1% once you get around 30% FOC...doesn't have this dramatic effect at more traditionl FOC percentages.
Logged
TGMM-Family of the Bow

The quest to improve is so focused on a few design aspects & compensating for hunter ineptness as to actually have reduced a bow & arrow’s effectiveness. Nothing better demonstrates this than mech. BHs & speed fixated designs

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: GT Nocks - want to replace
« Reply #6 on: December 22, 2011, 04:05:00 PM »
I like the G knocks but they only work with an adapter. Don't know if the aluminum adapters are still avaliable. If not when I run out I will have to like something else.
Logged
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline LimBender

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1080
Re: GT Nocks - want to replace
« Reply #7 on: December 22, 2011, 04:19:00 PM »
Bohning signature x 3.  That is what I switched to and you can find them anywhere and get them in a lot of colors.
Logged
>>>---TGMM Family of the Bow--->

Shoot some Zippers and a Bear.

Offline MJB

  • Trad Bowhunter
  • **
  • Posts: 1946
Re: GT Nocks - want to replace
« Reply #8 on: December 22, 2011, 04:19:00 PM »
Guys the adapters you speak of. Would that include the clasic nock & T nock ? I checked and KK has them. This is what they say.

Detailed Description :
These nock inserts are designed so you can use glue-on nocks on your carbon arrows. 5/16" size fits most brands of carbon arrows (use 9/32" nocks).

So I wouldn't be able to use a 5/16 nock ?
Logged
A Gobbler yelp Spring or Fall is a long conversation.

Offline BrownA5

  • Trad Bowhunter
  • **
  • Posts: 1268
Re: GT Nocks - want to replace
« Reply #9 on: December 22, 2011, 06:03:00 PM »
Thanks guys; this input is very helpful>  I know some have never had a problem with GT nocks, but to me it is not worth a bow limb or worse!
Logged

Offline MJB

  • Trad Bowhunter
  • **
  • Posts: 1946
Re: GT Nocks - want to replace
« Reply #10 on: December 22, 2011, 08:46:00 PM »
ttt
Logged
A Gobbler yelp Spring or Fall is a long conversation.

Offline MJB

  • Trad Bowhunter
  • **
  • Posts: 1946
Re: GT Nocks - want to replace
« Reply #11 on: December 23, 2011, 04:50:00 PM »
ttt
Logged
A Gobbler yelp Spring or Fall is a long conversation.

Offline TDHunter

  • Trad Bowhunter
  • **
  • Posts: 555
Re: GT Nocks - want to replace
« Reply #12 on: December 24, 2011, 06:44:00 PM »
I contacted GT and told them I there nocks were breaking and they sent me 3 Doz new nocks as the informed me they had addressed the material problem. What ever they changed it worked as I just did a bunch of stump shooting with them and no problem.
Logged

Offline Yeoman Bowman

  • Trad Bowhunter
  • **
  • Posts: 69
Re: GT Nocks - want to replace
« Reply #13 on: December 24, 2011, 08:18:00 PM »
I also replaced mine with Bohning Signature nocks. They seem much sturdier.

TDHunter: Thanks for the tip on contacting Gold Tip.I sent them an email also. Maybe they'll send me some extras.   :)
Logged
Yeoman
_ _ _ __ _  _  _  

35# Martin Hunter
40# Martin Savannah
40# Martin Dreamcatcher
50# Bear Montana
_ _ _ _________ _  _  _

"When it’s time to die, let us not discover that we have never lived." -Henry David Thoreau

Offline J.Williams

  • Trad Bowhunter
  • **
  • Posts: 972
Re: GT Nocks - want to replace
« Reply #14 on: December 24, 2011, 11:58:00 PM »
Bohning Sigs for me also.I've used them in the GT's and CX Heritage.
Logged

Online Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9155
Re: GT Nocks - want to replace
« Reply #15 on: December 25, 2011, 08:25:00 AM »
I am using 5/16  Merc nocks on adapters with my Gold Tips.

(thumbnail)

 

Killdeer
Logged
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline njloco

  • Trad Bowhunter
  • **
  • Posts: 2357
Re: GT Nocks - want to replace
« Reply #16 on: December 25, 2011, 09:23:00 AM »
Very nice arrows, and those look like they will hold up.
Logged
  • Leon Stewart 3pc. 64" R/D 51# @ 27"
  • Gordy Morey 2pc. 68" R/D 55# @ 28"
  • Hoyt Pro Medalist, 70" 42# @ 28" (1963)
  • Bear Tamerlane 66" 30# @ 28" (1966)- for my better half
  • Bear Kodiak 60" 47# @ 28"(1965)

Offline MJB

  • Trad Bowhunter
  • **
  • Posts: 1946
Re: GT Nocks - want to replace
« Reply #17 on: December 25, 2011, 08:12:00 PM »
Kathy,
That's what I wanted to hear. Nice projectiles by the way.  :thumbsup:    :campfire:
Logged
A Gobbler yelp Spring or Fall is a long conversation.

Offline BrownA5

  • Trad Bowhunter
  • **
  • Posts: 1268
Re: GT Nocks - want to replace
« Reply #18 on: December 25, 2011, 10:44:00 PM »
Bohning signatures seem to be getting the most votes.  Appreciate the input!
Logged

Online Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9155
Re: GT Nocks - want to replace
« Reply #19 on: December 26, 2011, 06:26:00 AM »
Speaking of holding up, which they are, it occurred to me that I have a slightly big rear... on the arrows... because they are collared abaft the fletches with a bit of 2117 aluminum shafting. This was painted over and has the arrow number dabbed on.

This probably gives the smoother transition to the nock.

Thanks for the kind words.
Killdeer
Logged
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©