Aall you BBD guys, what is the going brace hight for a border?

3p takedown

I have mine at 7 5/8" and it shoot lights out.

Yes, 7 3/4 to 8 1/4 seems to be about right for these bows. Sent you a private message with a link for all things Border- lots of good info there!

It is dependent on the bow length and limbs you have? XP-10s, XP-30s, HEX-4s, or HEX-5s?

My 62" HEX-5W likes 7" up to 7 3/4".
I prefer this bow set up at slightly under 7" 1/4"

My 60" HEX-5W likes 7" 1/4" up to 7" 3/4".
I prefer this bow set up at 7" 1/2"

Sid would likely tell me this is a little to high on the 60" bow, and your mileage may very.

The XP-10s, XP-30s, and HEX-4s may take a higher BH than the HEX-5s, but I only have experience with the HEX-5s.

Thanks for the info.

Its a 62" 50# @ 28" I pull 31" HEX4 limbs. This thing has the grip that ive been looking for for years.

I have an ultra riser with hex v5 limbs and the bh is just over 7inch.
If memory serves me right Sid told me anything from 7 to over 8.5...