Whatever shafts I happen to have in the quiver and grizzly broadheads and hexheads and bullet casings. Only the best. Hopefully I will get several dozen shafts from Twig Archery, considering the fact that I loose or blow up so many on his 3D course. Gonna get one for you this year john.

Full length GT 35/55 with 3gpi tube, 3 - 5" feathers  and a Zwickey Eskimo.

Carbon Express Rebel Hunter 6075 with 4, 5-inch feathers and a Muzzy 220-grain, 4-blade Phantom...

I'll be using Carbon Express Heritage 250's full length as I draw 31 1/2", with the old 145grain Bear razor heads.

3 5" Left helical shield feathers with pink fur tracers.

I do have a question, I always like to tinker, and have tried alot of different broadheads over the years, but always end up with the old bears when the season gets close, I see some of you shoot the woodsman heads, I've had my eye on them for awhile to give a try, do they really fly as good as stated? Also do the solid heads shoot as good as the vented? Since my Carbons like a heavy head I'd probubly opt for the 160 over the 123 or 130 grain woodsmans. Thanks DK.

23/64 cedars from suzanne st. charles.125 grain grizzlys.might also use home made 11/32 cedars with 125 grain woodsmans.also have some bamboo shafts with trade points.i have been practicing with all of them and all of them are shooting great.now i don't know which i'll choose.they are all great.steve

Beman Bowhunter 340's with Eclipse two blades.

Around 580grns.

Joshua

3R Traditional Only 400 shafts with 100 grain brass inserts and 150 grain Magnus Stinger 4 blades.

CE Heritage 250 with 200 grain Muzzy Phantoms (shooting them as a 2 blade head) out of my Toelke Classic Whip

CE Heritage 350 with 175 grain Woodsman Elite out of my Black Widow PSA...Mike

Easton Legacy 2216s and Magnus Stinger 2 blade 125gr.

55/75 Gold Tip and VPA 250gr. Terminators

5575 GT Traditional's, 50 grain inserts, 200 grain Woodsman Elites.

2018 Easton Legacy's w/125 gr. Snuffers or 2 blade Magnus'.

Beman MFX Classic 400 and Easton Axis 500, both tipped with the old Bear razorheads and 100 grain brass inserts.

80#-85# SUREWOOD SHAFTS-doug fir w/ 160gr Abowyer Brown Bear heads....though I have been looking at Stan's Red Feather Archery "Phoenix" 3 blade single bevel. They are a really well designed and built head!  

Same as last year well almost. Last year I used Grizzly El Grandes 190s. This year I will use the 200 grainer with beman ics 340's 31", 4x4" low profile nanners.

Gilbert

4" 4 fletch Easton Axis nano 400's tipped with the Muzzy Phantom 220's.

I'll be shooting my Easton Gamegetters XX75, cut to 29", Wensel Woodsman 125 grain glued onto a 28 grain adapter and fletched with 3 5" shield cut feathers.  Hopefully I'll be shooting them into some deer and turkey!  Can't wait...

-Jeremy

Joe,Did  you get them from the Smithsonian Institute? Is that one on the right an old Hill?

Looks like a Hunters Head from a few years back