Minwax Poly compatablity

smoke1953 · January 27, 2010, 06:31:00 PM

I'm trying minwax poly for my sealer and finish on white ash arrows. Can fletchtite or duco be used?

Jwilliam · January 27, 2010, 06:34:00 PM

Should work fine. I seal all my cedars with Minwax poly, and have used Fletchtite and Duco with good results.

Bill

Hot Hap · January 27, 2010, 06:43:00 PM

I use the Duco with Minwax. Hap

Don Stokes · January 27, 2010, 07:17:00 PM

Superglue will also work with polyurethane formulations. The middle grade in thickness, not the watery kind or the gel. Much quicker than the others.

Jim Curlee · January 27, 2010, 07:38:00 PM

I would use the Duco, I know that it will work.
Jim

Paul WA · January 27, 2010, 07:53:00 PM

Duco over poly works fine...PR

MSwickard · January 27, 2010, 08:02:00 PM

Been using Minwax poly and Duco cement on my wood shafts for years. Never had a problem. Just take some 0000 steel wool to the shaft to rough it up some and works like a charm.

smoke1953 · January 27, 2010, 09:14:00 PM

Thanks guys.

Shawn Leonard · January 27, 2010, 09:31:00 PM

Duco, no fletch-tite! Shawn

Steve Clandinin · January 27, 2010, 10:41:00 PM

I've used Min-Wax Poly for years and only used Fletch-Tite ,never had a problem.

Jim Curlee · January 28, 2010, 08:14:00 AM

Save yourself a few bucks, buy the DUCO.
Jim

smoke1953 · January 28, 2010, 09:57:00 AM

That sounds serious Shawn!

GangStarr · January 28, 2010, 12:21:00 PM

with the minwax polycrylics (waterbased)
use Duco
fletchtite is like paint remover

barebow17 · January 28, 2010, 01:29:00 PM

I have used the minwax for years with duco and fletch-tite platinum.Never had a problem.

barebow17 · January 28, 2010, 01:32:00 PM

GangStarr you do nice work.Some of the best splices I have ever seen.

Shakes.602 · January 28, 2010, 01:45:00 PM

Of Course, MY Fletching Glue of Choice is: Saunders NPV

GREAT STUFF on ANY Surface!!