Want to thank the Trad hunter who suggested it is a easy way to add weight by using .243 copper round.

I  put 24 epoxy to the flat end of the .243 copper round and pushed down the shaft from the nock end with a .22 cal cleaning rod.

I then inserted the nock and left the arrows point down on the point with nock up.I left then cure for 3 days.

the copper bullet point added 75 grains to the arrow.

i did that with some 22 bullets.  i have to flatten them a but but worked good.  i aded about 100grs up front

any one else try this ???


I shot a 3D course yesterday with them and they worked very well... did not come lose and gives you good FOC plus the peneration.