Is there any way to cut carbon arrow without a arrow saw? Don't really want to shell out 200-250 buck for a tool that I probably want use very often. Tried making a saw with a dremal tool had trouble not getting a square cut. Has anyone done this successfully? Any one cut with a dremal and square up with one of those tools that G5 sells?

e-mail sent

Take the guard off of this saw and you will be able to use the cut-off wheel from the second link. One wheel should be all you need...

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=42307

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96255

I use a Harbor Freight mini cut off saw,mounted it on a scrap board and made an adjustable stop for repeatable length cuts.Have around $35 total in it,works great.I made the stop with a tapered hole so I can bring the saw into the shaft and rotate the shaft as I cut for a squarer cut just like the more expensive saws.

Thanks guys

Sounds much better than a $200 saw    

If you already have a dremel tool, you can use it.  I rigged mine up mounted to a board and it works well.

I second the Harbor Freight saw. Works great. Have cut many arrows with mine.

that is cool.  gonna get one

JRY309 can you post pictures of your setup?

Thanks.

God bless,

Jose