125 grain Magnus Stinger on a 2216...Mike

135 grain Magnus on a 2018

I have 145 Grizley BH with 30 gr screw in inserts on Gold Tip 33/55's, 3 fletched 5" RW shield cuts.

Zwickey Deltas on 11/32 POC shafts, four-fletched with 4" shield-cut natural greybars I ground myself, dyed red.

160 grain Magnus I, 75 grain steel adapter, and 27 1/2 inch 2216 for 622 total grains.

Z's on cedars out of a Pronghorn

Stinger 150s on Heritage 250s with 100 grain brass inserts.

Zephyr Sausquatch on a harwood shaft.

125grn stinger on an axis 500 with a 100grn brass insert.

125 magnus.100gn insert.35/55GT

Older Zwickey Blackdiamonds or older Bear heads on a GT3555 with a 50 grain brass insert, alu. broadhead adt. on the tail end are 4, four inch parabolic cut feathers glued to a Trad Gang Wrap, the heads are razor sharp, so I promise they wont feel a thing  

STOS 145 gr and Ribtek 125 slim.

145 gr. Eclipse on a tapered larch shaft.

190 Grizzlys on 30" of cedar shaft for a total wt of 675Grns off my L/B  - 145 ribteks on 30" of cedar for a total wt of 550grns launched from my recurve, all heads razor sharp or they don't make it to my quivers!!

160gr grizzlies on ash shafts

For Carbon Shafts: Eclipse 145 (double bevel) w/ 75g steel (the good ones) adapter.  Footed/extended (33.5") Heritage 250 shafts - total arrow weight of around 700g.

For Wood (If I can get them together this season): just the 145 Eclipse.  Tapered Doug Fir shafts footed w/ walnut Reparrows.

160gr STOS w/100gr steel adapter on AD tradlites

135 and 150gn Simmons Tigersharks on short and long aluminum adapters on beman bowhunter 500s.

Ancient Zwickeys.  They are still working.

Zwickey No Mercy SB, some on cedar, some on carbons