arrow saw

nhbuck1 · November 27, 2016, 08:58:00 PM

what can you use to get a good cut for an arrow? i dont have a saw i need something cheap

November 27, 2016, 09:31:00 PM

Go to Harbor Freight and get one of the mini cut off saws, or if you have a dremel tool, rig up a jig to keep it square and use a cutoff blade.

Bisch

Hermon · November 27, 2016, 09:31:00 PM

A dremel tool will work for aluminum and carbon.

Caleb the bow breaker · November 28, 2016, 08:57:00 AM

I use a mitre saw with a finish cut carbide blade in it. I just go really slow and wear a dust mask. Use it for wood and carbon. For aluminum I use a tubing cutter. Probably not the best tools for the job and some may argue against them but I have had nothing but great results.

C

Buckeye1977 · November 28, 2016, 09:13:00 AM

QuoteOriginally posted by Bisch:
Go to Harbor Freight and get one of the mini cut off saws, or if you have a dremel tool, rig up a jig to keep it square and use a cutoff blade.

Bisch

X2

Nick

Car54 · November 28, 2016, 09:49:00 AM

It's been awhile since I looked on YouTube, but it showed how to build a cheaper arrow saw.

M60gunner · November 28, 2016, 11:00:00 AM

For years I used a Xacto miter box and saw. Used to be about $12 for the kit. Came with a fine blade I used for aluminum shafts. It will work with the wood saw blade for carbons. I always scored around the whole shaft before cutting through to prevent the carbon from splintering.
That got to slow and tedious so I got one of those cutoff saws from fleabay. $25 bucks with a spare blade. All I use now.

stagetek · November 28, 2016, 11:41:00 AM

Yep. Go get the Mini Cut-off saw from Harbor Freight. About $25.

arrow saw

nhbuck1

Hermon

Caleb the bow breaker

Buckeye1977

Car54

M60gunner

stagetek