Stalker Riser

Wolf1007 · February 13, 2016, 02:18:00 PM

Guys,

Going to be placing an order for a new Stalker Wolverine FXT shortly. I am looking at duplicating the center finished riser in the below pic. Looks like bocote and ____? I thought cocobolo but did not look red enough, any ideas? Thanks!

bogeyrider63 · February 13, 2016, 02:25:00 PM

Kingwood?

Keith Zimmerman · February 13, 2016, 02:27:00 PM

Wenge

Rick Butler · February 13, 2016, 02:35:00 PM

I'm no expert but it looks like Wenge to me.

Wolf1007 · February 13, 2016, 02:39:00 PM

Isn't she pretty though! Wenge huh?

February 13, 2016, 02:58:00 PM

I'll bet South could tell you without a doubt what it is!

Good looking combo, though!

Bisch

Wolf1007 · February 13, 2016, 03:04:00 PM

Yeah I shot him an email. I am waiting on a test drive bow he sent me before I place an order and got antsy!

Hot Hap · February 13, 2016, 05:14:00 PM

Zebra wood?

Bowwild · February 13, 2016, 05:33:00 PM

I have a wedge riser and it is much darker. I realize woods vary in more than grain, including color.

My first thought was Shedua.

Boy, those Stalkers have the most comfortable grip on any bow I've shot. If I were to get one I'd get it without the brass inserts showing on the face (inside) of the riser ends though. That's why I sold my Schleyer version.

Wolf1007 · February 13, 2016, 05:47:00 PM

If I am not mistaken for 2016 the brass inserts are no longer showing, I thought I read that either on the web site or new catalog.

highlow · February 13, 2016, 06:26:00 PM

Rosewood? Personally, I'd take that black and white ebony. Either way, you can't go wrong with one of South's bows. And Wolf, I think you're correct about the inserts no longer showing. My Wolverine shows them but doesn't bother me in the least when shooting because I don't see them. And boy, does it shoot.

Keith Zimmerman · February 13, 2016, 07:26:00 PM

I talked to South a couple yrs ago about covering up the brass. At that time he was going to do it. I Think now they are covered.

Bivyhunter · February 14, 2016, 08:31:00 AM

Several of you guys are right, that is wenge. And yes, the brass inserts are now covered. I have a few older risers floating around in my shop that I made over the years that I need to finish up, those will be the last of the handles with the inserts showing. Thanks for the guys that pushed me into changing, it does clean up the lines on the bow.

nineworlds9 · February 14, 2016, 08:51:00 AM

that b&w ebony and Gaboon ebony looking one has my heart in palpitations. my next stalker needs to be something like that! wow. the standard grip on these bows is just phenomenal.

dnurk · February 14, 2016, 10:39:00 AM

I'm with you Chuck. That b&w ebony one on the right is all kinds of awesome. Im actually planning to put an order in on. Wolverine soon and am loving that wood combo. Wonder what the other wood in there is.

TOEJAMMER · February 14, 2016, 10:47:00 AM

Dnurk, Perhaps Macassar ebony.

dnurk · February 14, 2016, 12:50:00 PM

QuoteOriginally posted by TOEJAMMER:
Dnurk, Perhaps Macassar ebony.

That's a good guess. Does appear to have a hint of brownish grain to it. Gabon ebony that I've seen tends to be jet black.

Tim in Wa. · February 15, 2016, 04:13:00 PM

I don't want to hijack but I think the question has been answered
Any thoughts on the relative merits of the Wolverine versus the coyote Stalkers ?
I just thought I would take advantage of a thread that already has the attention of some Stalker fans
Thanks
Tim

Wolf1007 · February 15, 2016, 08:20:00 PM

Seems like one is a dedicated recurve in the Wolverine and the Coyote mates to both a recurve and longbow limb. Both are good looking, I am ordering a Wolverine FXT shortly!