::::RESIZE YOUR PIX PLEASE::::

And a quiver I built----any ideas on a strap? I apologize for the poor camera-phone pics, I'll get some with my 35mm today, too.

Hard to see em clearly but the look a bit like the"Barta blunt". Im sure they will do the job  rather well. How did you do it??

Its just a 7/16" stainless flare insert and a 1/2" stainless end bolt---the flare screws right onto a 11/32" square cut end and the bolt screws in the front---I use hot-glue to keep it tight. Kinda heavy, but seem to fly well on flu-flus.

Thats good to know, thanks for sharing.

This is mine. I use a .357 casing, steel banding (from sub-division building work-site) and a pop rivet. Cut a square from the banding, punch a hole in the center, pop rivet it into the casing, bend the ears on the banding, put it on a shaft.
Quite durable, almost free and less losable than a Judo because it has no springs to come off.

I thought the size limit was 600pixels wide. My biggest was 159 by 141 pixels.

If they were I wouldn't have removed them...please re-post if you'd like.....