New Broadhead

Bob Morrison · September 03, 2015, 08:11:00 PM

This is a Proto one piece broadhead coming out soon.

300 gr, 250 gr, 200 gr, 175 gr.

This broadhead pictured was test shot into a cement block 2 times straight on and one on an angle glancing off, All 3 arrows broke.An old stop sign 6 times, Broadhead still spins perfect, Edges touched up on my Work Sharp, This Broadhead will still hunt as good as a new one. A true 50-55 Rockwell hardness.

highlow · September 03, 2015, 08:38:00 PM

Looks like a good head. Wonder the cost. Any idea?

Charlie Lamb · September 03, 2015, 08:49:00 PM

You sure have a knack for broadhead design Bob. What's the cutting diameter.

Bob Morrison · September 03, 2015, 09:04:00 PM

Cost is going to be $49.50/3.
cutting Dia. is 1.20" And this can vary, if you want 1.5" we can do it but material costs go up.
I'm a big fan of 300 grain at 1.125" so this is what I'm into. I shoot 44-50# at 26" on a good day, I've just had too many good things at that setup. I have to say this is all done in house, Nothing is sent out to be heat treated or coated or anything. So knowing not everybody what 300 gr. this design will go to 175gr.

Thanks for the interest.
Bob

September 03, 2015, 09:18:00 PM

Those look good!

Bisch

Cwilder · September 03, 2015, 10:03:00 PM

Is it a screw on or glue on?

Bob Morrison · September 03, 2015, 10:15:00 PM

Screw in, only.

M60gunner · September 03, 2015, 10:34:00 PM

Very nice indeed, I like the fact it is being done "in house". Gives me the impression of "handmade".

AZ_Longbow · September 04, 2015, 12:12:00 AM

May need to try some out.

bowfanatik · September 04, 2015, 12:20:00 AM

is it better then VPA or Grizzly

DesertDude · September 04, 2015, 12:45:00 AM

Other than the Rockwell hardness and price, how does your broadhead differ from the VPA? Type of steel? Coating? Length?

Thank you

Mark

Cwilder · September 04, 2015, 07:06:00 AM

Very nice Bob. I will order me some 175's once they are ready

Bob Morrison · September 04, 2015, 08:02:00 AM

Its a 3 blade Broadhead.... Cutting length of blade is 2.7" tool steel. Sorry but I don't get into this vs that vs that.A High quality broadhead, that can also be made from Stainless steel if you want it. Some real good quality 3 blade heads out there, now you have one more to choose from.

Bob

Bob Morrison · September 04, 2015, 09:21:00 AM

I'll have 20ea.300 gr and 3ea.250 gr. ready to ship Monday.

Bob Morrison · September 04, 2015, 09:30:00 AM

I'll have 13ea. 300 gr and 3ea.250 gr. ready to ship Monday.

DesertDude · September 04, 2015, 10:41:00 AM

Thank you for your response. Just trying to make a informed discussion.

Danny Rowan · September 04, 2015, 11:23:00 AM

Bob,

I sent you a pm.

DiamondD · September 04, 2015, 05:36:00 PM

Going to have to try these when you get the 175 gr. out.

screamin · September 04, 2015, 11:36:00 PM

It looks like the ferrule of the head is larger than the shaft, is that a 5/16" shaft? If so, we have a winner here, no shaft hang up on the way through.

JamesKerr · September 04, 2015, 11:54:00 PM

Looks like a good head! The 250 grain would work great for me.