What do use guys use for the heat source for gluin on broadheads. I was just gettin into woodies and was thinkin about gettin one of those glue pots, or alcohol burner. What do you guys use and what glues work best. Thanks-Robert.

propane torch.  Heat the glue stick and twirl the tapered end to get a smooth coat   .  Don't have to wait on a glue pot that way!

Stacker

Alcohol Burner


http://www.3riversarchery.com/product.asp?i=5376

Alcohol burner here too. Hap

Yep, Alcohol burner.

Propane torch.

i use ferrul tite and a propane torch

I was using the stove but the wife just bought a new one, and i was to be warned only once    I thought about getting a alcohol burner but i just have been using a propane torch.

I get these small aluminum pans at work, probably about 2" in diameter. I put my glue stick in that and heat it on the kitchen stove. When I'm done, I just let it cool and put the whole pan in my tackle box, ready to use next time.

If I need to re-heat to align a broadhead, I use an alcohol burner.

alcohol burner


Bill

I use crazy glue with very good results and when I want to remove a head I just heat it with a lighter and take it off with pliers while its still hot.

Propane torch and Ferrul tite  :D    :D

Devcon 2-ton  :D

Any body use regular hot melt? And what is denatured alcohol?

You can use regular hot melt, but the white sticks aren't very strong. The amber ones are better.

Denatured alcohol is available at hardware stores (and probably even wally world) by the painting supplies and solvents.

Thanks guys

Or you can buy Heet in the automotive section, it's also denatured alcohol (Stock up in the spring when the run it on sale).

I've been using a hot glue gun, and the yellow easton glue sticks from Dick's...