Help    

I want to put footing on GT Velocity .300

I will use Easton eclipse X7 for that ''project'' ,
Just i don't know which spin ,  2114 ?
 

My GT's take a 2117.

QuoteOriginally posted by njloco:
My GT's take a 2117.

GT ? velocity ?

Trad Gold Tips.

I had trouble using the 2117 or 2114 over the GT Trads. I ended up going to 2213. I did a couple of the GT Expeditions and the 2114 worked fine. I can only guess it is the wood grain stuff on the shaft that seems to make it a little larger diameter?

Guys :-)

I asked for GT Velocity ,they have .296" O.D
and gt trad .311"

So ,i need different footing spin :-)

The 2113 is 21/64 outside diameter. The wall thickness is 13 thousands.
The od is .296 so the 2113 would have a inside diameter of
296 minus 13 =283 too small

A 2213 has a od of .343 minus 13 = .330 inside diameter which Is too big

So it might be tough to find a aluminum footing to fit.

QuoteOriginally posted by macbow:
The 2113 is 21/64 outside diameter. The wall thickness is 13 thousands.
The od is .296 so the 2113 would have a inside diameter of
296 minus 13 =283 too small

A 2213 has a od of .343 minus 13 = .330 inside diameter which Is too big

So it might be tough to find a aluminum footing to fit.

Aren't there two walls on each diameter?
2113 = 0.296 - 0.026 = 0.27 = too small

2213 = 0.343 - 0.026 = 0.317 = no better than above.

homebru

I can tell you that the size #1 ArraFoot kit sold by Vintage Archery will fit the GT Velocity 300.

2113 to small !
2114 is ..... ?

Check here
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=2&t=000098

QuoteOriginally posted by bowfanatik:
Help        

I want to put footing on GT Velocity .300

I will use Easton eclipse X7 for that ''project'' ,
Just i don't know which spin ,  2114 ?
     

For the velocity 300 use 2114 (tight) or  2113(better) for 340 use 2117

2115

QuoteOriginally posted by ncsturkey:
2115

I can't finde 2115 :-)

QuoteOriginally posted by hybridbow hunter:
 

QuoteOriginally posted by bowfanatik:
Help            

I want to put footing on GT Velocity .300

I will use Easton eclipse X7 for that ''project'' ,
Just i don't know which spin ,  2114 ?
         

For the velocity 300 use 2114 (tight) or  2113(better) for 340 use 2117 [/b]

Thanks !!!   :-)

Can't you read the document i posted? That s not quantum physics but the listing of internal diameters in alum shafts, you just have to chose the right shaft for your footing by looking to the proper internal diameter (I.D) at the right of the alum shaft
Hope it will help