3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Fletched arrows grouping left

Started by Florida bowhunter, September 22, 2014, 08:59:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Florida bowhunter

Okay I was shooting really well out to 20 yards, and getting better at 25,the next morning I go out to shoot and no matter what I do my arrows group left of where I shoot, could this be a brace height issue....?

Pete McMiller

Sure, could be.  Try increasing it an eighth of an inch and see what happens.  You can always go back if it doesn't change point of impact.  Could also be something in your form.  Try one thing at a time and see what happens.
Pete
WTA
CTAS
PBS

Charter member - Ye Old F.A.R.T.S and Elkaholics Anonymous

MOLON LABE  [mo 'lon  la 've]

"That human optimism & goodness that we put our faith in, is in no more danger than the stars in the jaws of the clouds." ............Victor Hugo

CRS

Is your bow cant the same?  Changing the can't of your bow can change impact.

Side plate changed?  Arrow is kicking off.

Release the same? Not plucking are you?
Inquiring minds.......

bigbadjon

Since you asked about brace height... did you lower the brace height lately. Lowering the brace height will make your arrows group left.
Hoyt Tiburon 55#@28 64in
A&H ACS CX 61#@28in 68in (rip 8/3/14)

Arctic Hunter

Is the string shot in well? If so, the brace height shouldn't change. Sounds like it could be a form issue. Make sure you are keeping your bow arm up and still until after the arrow hits. Canting the bow excessively will also cause me to shoot left. So will a stiff bow arm and fighting to build back tension. This is assuming you haven't changed anything. Hope this helps.

Florida bowhunter

Guy's I haven't changed brace height,  I got the bow in July set the brace height and been shooting ever since so the string has probably stretched I am gonna check it this morning,  I have everything written down so we will see...thanks guy's

smokin joe

Make sure you don't tip your head to meet the string as you anchor. That will make you shoot left.

Always draw to anchor and never move your head to meet your draw. That might help things out.
TGMM
Compton
PBS
Trad Gang Hall of Fame

overbo

Shoot 2 bare shafts and see what's going on. If your bare shaft flies well but still impacting left? Then you have an alignment issue in your form or you are peeking(raising you head) at the arrow flight before the arrow clears the bow.

Florida bowhunter

I do think sometimes I do tip my head, the reason I say that is because on a couple occasions the string hit the tip of my nose upon release.....lol

creekwood

Check and make sure that your anchor is tight against where ever you hold to.

flungonin

I had the same problem Sunday. Took about a hour to find the culprit. Changed to heavier field tip. Nope. Go back to original. Checked brace height. Good/same. String nock still in place. Same arrows I got dialed in 4 days before. Just kept shooting, maybe a really hosed release, man am I grasping for something, Check the cant of the bow, check. Anchor point same, even video'd, Check. Finally , Finally. MY grip! My grip was not the same from 4 days ago. Why did or would it change, who knows and why??? Anyway got my grip back and 3 arrows, 3 in dia on 15 yd tgt ,. Yea

Flying Dutchman

It don't mean a thing if it ain't got that string! [/i]                            :rolleyes:              
Cari-bow Peregrine
Whippenstick Phoenix
Timberghost ordered
SBD strings on all, what else?


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©