I have a 15" Phoenix riser with long Dryad Epic recurve limbs. Bow should be 60" with this set up.

Question - (1) what is a brace height you who have this set up are using and (2) where are you measuring the brace you suggest (from the throat of the grip or where limbs exit the limb pocket?)

Thx!

http://morrisonarchery.com/html/riser_charts.html

Per Bob's site, looks like his recommended BH is 6.75-7.25" for that setup.

I have his 17" Phoenix with medium TT Black Max's (60" bow) and run 7", which seems to work well.

Measuring from deepest part of grip throat.

The Phoenix riser is the bomb, btw!

The Epic limbs will run low if you want but usually like about 7 1/2".  Measure at the throat of the grip.

Mike

Perfect! Thanks all.

I run my 17" riser at 7 1/4"- best overall performance for me