Hey guys, I've got some people interested in some BigJim Broadheads and for me to make an order, I will have to pre sell 75 heads. I have already taken an order for 18 from one person so we are well under way.

The heads in question are 300g 3 blade screw in's  made by VPA. The are 1 1/2" cutting diameter.

I will also consider the 250 g glue on heads if I get the same 75 pre ordered heads.

Prices haven't changed. If you don't remember how much they were, you will have to pm me because I can't list it here. That is the best way to get on the list too.
thanks, bigjim
thanks, bigjim

I will take 9 of the 300 gr Screw-ins.  Assume they are 3/pack....So 3 packs.

For anyone who hasn't seen these, they look like pure death on the end of an arrow!

Could probably put them on an atlatl ! I have taken many game animals with them and it lets the wind out of them and starts a great blood trail in a hurry.

Thanks Ken,

BigJIm

I will take two packages of three.

Thank you Big Jim for developing a possible opportunity to acquire more of these fine BH's.

I already have 18 Jim, but if it comes down to the end and you need to sell some to get to the 75 to make the order give a shout...

If you like the 160 Snuffer, these are similar only much better quality!  Great heads!

I would take 12  in 250(4 packs of 3=12)

I will take a package of 3 heads.

i pre odered 6 packs of 3 heads in 300 gr.
i have killed something like 40 big games with the BJ 300 gr BH and trad bow since i discovered them from 2000+# African Eland to light roe deer and firmly think those heads are the best overall heads rgarding to durability, cuting diameter /lesioning power, easy sharpenning
Come on guys these things are terrible ! order some BH to test

cacciatore, the 250's are only in the glue on and although there is some interest, it is still low for those.
Are you looking for the screw in? (300g) or
are you looking for the glue in ? (250g).

thanks, bigjim

I'll take two packages of the glue on 250grain

I wish I knew of they would fly well from my bow! According to spine calculators I "should" be able to make it work.

Can anybody put up some pictures of the damage these heads do?

Iowabowhunter...Perform a Search under The Dark Continent forum for a thread titled "Back from Magersfontein in RSA".

Perform search using 'Big 3 BH' and the thread will immediately come up.

Some Big 3 damage there.

Sorry,I figured they were available in 250 screw ins.

I wish they were some screw in's in 250 as it would open this up to more people, but that's another can of worms.

thanks, bigjim

I wish they were some screw in's in 250 as it would open this up to more people, but that's another can of worms.

thanks, bigjim

OK I can?t leave this offer to go down,I take 3 packs(3x3=9).

I think you will like them.

thanks, bigjim

I'm in for 3x3=9  
 
and if you get close on the 250's I would also get in on those.

i will take 2 packs of the screw on's- but if ever you make the glue on's, i will also take an additional 2 packs of them.

you guys think they will perform well out of a 50# bow on canadian moose. the question is not so much the broadheads- but with the increased cutting area, will the 50# be sufficient?- i realise there are a lot of other variables at play here- just trying to get an idea.
thanks