PTFII 45@29 that I draw to 31" 2216 32" with 175 gr.
PLII 54@29 that I draw 30.5" 2315 with 175 gr.
Both bows have SDB strings on them.

Darren

QuoteOriginally posted by Jack Rehacek:
I shoot a MA III useing 30.5 2216 with a 150 gr head, drawing 56 lbs. @ 28 inch. It bare shaft tuned perfect there so that's what I use.

sorry I tried to ad the model of the bow and messed up and posted it again.

Thank you for the posts guys. I'm still trying to fine tune the bow.

i shoot a 50 lbs at 28 kb, i draw 27 1/2 and my arrows are ce heritage 150 cut to 29 with 175-190 grains up front

60" PSA  60@28 28 1/4" 2020xx75 with 175 gr head  or if shooting woodies, 75-80 tapered cedars with 145 gr head

51@29 pchx
cx 350  
50 brass and 175 head
Arrows arrows are 31 inches I belive

one thing i am learning is that there is "one way".

Sheesh, i was hoping to find some answers, but all i learned is that you can just about make anything work. lol.

I am shooting a 64" 55@30" I pull 31" so I am messing with 32" or 31.5" 7595 with 175gr. tip and 50gr. insert.  The 3rivers spine calculator says that 31.5 is perfect so we will see.

Shoot a PCH 51# at 28 - 58".  Essentially the same draw and arrow as dougbutt.

Thank you for all the replies.

Tradgang at its greatest!