Would a fella be able to put a wrap on a wood arrow? Ill only be making a dozen arrows and don't want to spend alot of money on paints and stuff, thanks!

I have done it. Besure you get the wraps that are an inch wide for wood or aluninum the ones for carbons are to narrow.

Done it. Don't like it, but it works.

I use them mainly because it's easier to refletch. They work well and look good.

You'll find some cool ones in the Tradgang store and Onestringer, a sponsor here, will surely have something you like. As mentoned, make sure you get the wider ones for wood arrows.

A spray can of paint and some masking tape is less than $10.  Will look a lot better than wraps, IMO, but, whatever floats your boat.

sure can

But I saw an article in PA about using shrink tubing.
Can easily be removed without residue

could be an option

Stain you crown a different color then the bottom. Put bright feathers on them. Looks a lot better then wraps on wood. Why use wood if your going to put wraps on them get aluminum or carbon shafts for wraps.

You blaspheme!        

You're killin' me.....wraps for woodies....   :eek:

Do as Craig suggested before going to wraps...please.

I've seen wraps that look as good as any of the best cresting jobs out there.

The only down side is there will always be a seam with a wrap, but good wraps properly installed, and the seam is insignificant, and hardly noticeable.

In short - use the wraps if you want to. It's you you're looking to please, not any of us. 8^)

Don't put wraps on wood, Dude! You can MAKE some cool stuff for cheaper. A little creativity goes a long way...

I agree with everyone here, a can of spraypaint and a roll of masking tape will nget you a better product and actually be cheaper than wraps. 1 can of paint shoudl do many dozen arrows, as will the one roll of masking tape.

The only advantage to a wrap is the ability to remove fletching by removing the wrap. This WILL remove the finish from the woodie, but it will not remove wood or gouge the wood.
Tim

Any certain kind of spray paint or will any work. I'm wanting a orange crown with 4 orange barred feathers and an orange nock

I am like original poster.....dont want the expense and mess of dipping and cresting at the moment...dont like the look of spray paint but love wood arrows.  Just dont have the time and space to do it right...without making wife mad for fear of having accident in office on carpet....and garage is full to the max already with cars, motorcycles, canoe, camping, hunting stands,etc...haha

And you are not going to do crisp cresting with a spray can and most of the sharpie work I see is dismal at best.  I like crisp lines and good colors if I am going to do them.....or will leave stained only.

I designed my wraps at onestringer to match my actual painted arrow design I have used for over 20 years.  Got first batch last week and other than the yellow being a bit more green than I wanted....look great.  See for yourself if you can tell....

I dare say if I took the wrap to the edge of the nock you would not be able to tell a difference if you were honest.  Especially compared to some old arrows in box behind it....

These are douglas fir shafts that I lightly burned with a torch to give some contrast in addition to the natural woodgrain.... and two coats of Minwax stain-sealer and then three coats of wipe-on poly before adding the wrap.

Wraps are very high quality...very thin..stick as if they were shrink wrapped they are so tight as I messed up one and took a while to remove but with no wood damage....and you wont find the seam on mine unless you look very, very, very closely.  Plus I bought the size for 23/64 so I could just use one size for both my shaft diameters...outstanding product.

Only thing about plain wraps is they will have a scuff on them when you shoot them unless you add the protective coat that is offered.  I usually only practice with one arrow from each dozen with so not an issue with me.
       


if you want to use them...then do it. hell with everyone else LOL.  I would get from onestringer though...I got some clear ones from 3Rivers to try as was worried about fletching sticking to arrows with no sealant added after Minwax stain-sealer as it is a little waxy sometimes.  Worked out nice but like OneStringer better.  You can use one of their hundreds of designs or do like I did and I got one of my arrows out and copied the design...and of two others I have....and they save in your account for use over again.

 http://www.onestringer.com/

You have to seal the wood arrows anyway, so taken a few extra minutes and dipping or spraying or just plain old painting a crown on is not that bad and I agree that wraps on woodies just seems weird. Shawn

I do all of my arrow making (except for fletching) in my unheated shop.  Temperatures have been below 60 for quite a while.  If I need to make arrows for a hunting trip or a new bow for a 3D shoot or whatever, how do folks so adamant about not using wraps on wood suggest that I make them?  When I've got the right temps, I dip my arrows.

Everything I use I can do them right in the house no smell. Been making them for over 20 years. Do you ever paint your house. You can also use house paint for the crown to keep the smell down. Dip with clear water base poly, also no smell. testors for cresting. Making wood arrows is all about the fun of making arrows.

I have considered a clear wrap for just under the fletching to keep the glue from biting into the finish and make an easier refletch.

The only warm place I have to make arrows is in the house, no basement. I tried, on a whim, using those 8 oz. sample cans Home Depot will mix for $3, any color you want. Thinned it down well and used it for my crown dip. Worked well, no smell, water clean up. The only small issue is it is a very flat paint and my crestor left tracks in it so I did a quick overdip befor cresting the others.

Eric

clear them before you crest, no marks. I have lost or broke an arrow before it ever needs refletched. I have taken feathers off with a single edge razer blade and refletch before. It's not hard to do. Steel wooled and restained, cleared, refletched. Just can't be in a hurry.