Removing Beman ICS Bowhunter Label

Longbowwally · January 03, 2013, 09:07:00 PM

I want to remove the Beman logo on my Beman ICS Bowhunter shafts. I've used acetone to remove the logos from other brand shafts but don't think that will work on the Bemans. Any ideas on how to remove them? thanks

Guru · January 03, 2013, 09:09:00 PM

do mine all the time with acetone bud...works great

Missouri CK · January 03, 2013, 09:21:00 PM

Use 100% acetone from hardware store and you gotta use some elbow grease.

Oregon Okie · January 03, 2013, 09:26:00 PM

Yup it works but takes longer.

tippit · January 04, 2013, 09:05:00 AM

I scrap the lable off with the edge of a knife & lightly sand with 600 grit...course a tippit knife works best

Zradix · January 04, 2013, 09:08:00 AM

Yep strong acetone.

don't try your wife's nail polish remover, just isn't worth the effort.

ZaneD · January 04, 2013, 11:47:00 AM

I always use paint thinner, never had a problem on plain black shafts like the bowhunter. Although I haven't tried it on woodgrain carbon shafts.

Richie · January 04, 2013, 07:30:00 PM

Acetone X 4

DaddyPaul · January 05, 2013, 10:18:00 AM

Goo Gone. Works great on Cabela's Stalker Extremes.

gordydog · January 05, 2013, 10:26:00 AM

I too remove using a knife blade on edge for the Beman MFX label.

hedgerowhuntr · January 05, 2013, 09:56:00 PM

Acetone, elbow grease, and sometimes a brillow pad depending on the look I'm going for

Longbowwally · January 06, 2013, 08:04:00 PM

didn't think the acetone would take it off but it did. Thanks for the help guys...