3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

I got problems tuning my Griffin

Started by Blaino, June 27, 2012, 09:09:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Blaino

64" Griffin marked 49@28" I draw 30"

Been trying to tune 55-75 Gold Tip full length with regular inserts.

I'd like to shoot Big Jim's Big 3 this year. Tried bareshafting with cut 2 arrows all threat down to 30.25"..... Showed weak the whole time.  I don't have a good release to say the least so I usually let bare shafts get me close and then fletch them up. Has worked in years past..... Not now    :banghead:  

Then I thought I'll try to paper tune.  Best I can get is about about 1-1.5" tear that shows the fletch hitting upper left. I have moved my nock point from 1 inch to .25 and don't see much of a difference.

I thought well that's close. Let's see how the fly at 20 yards. Corkscrew the whole way. Tried 4 fletch at 90 and 75/120 no change. Tried 3 fletch with cockfeather up, in, and out. No change. All 5" feathers.

Now I'm just plain lost because I haven't had this problem before.
"It's not the trophy, but the race. It's not the quarry,
but the chase."

Blaino

The best paper tune came with full length shafts with 125g on the end.
"It's not the trophy, but the race. It's not the quarry,
but the chase."

Dave Bowers

5575 sound a bit stiff imo...I would bare shaft them first before paper tuning.

lefty4

Just for giggles, put an extra piece of Velcro, or whatever material you use, on the strikeplate to build it out and see what happens.
I had a really good group going... until I shot the second arrow.

My best bows are the ones someone else didn't want.

"Be careful of something that's just what you want it to be."  Waylon Jennings

Bear Heart

I shoot nearly full length heritage 250 with 145 grain points out of my 50@28 griffin 60" bow.  Draw 29".
Traditional Bowhunters of Washington
PBS Associate Member
Jairus & Amelia's Dad
"Memories before merchandise!"

StickBowManMI

I shoot full length Traditional Goldtips (35/55 shafts)with 100 grain brass inserts and 175 grain tips. They paper tune just fine out of my Griffins at 54lbs@28". No problems. I draw 29" and they work just fine. The 55/75 shafts are probably too stiff. Try a 125 head and work downward from there. Hope this helps.

xtrema312

Do you have a nock point under your arrow? Could be your tracking off your shelf material. What point weight are you shooting? I would think you would get it tuned with that shaft.  Always weak makes me think it is kicking of the shelf or way stiff and you just have not got enough weight up front yet.  one of the two or both have been my problem with what you describe.
1 Timothy 4:4(NKJV)
For every creature of God is good, and nothing is to be refused if it is received with thanksgiving.

Firefly Long Bow  James 4:14
60" MOAB 54@29 James 1:17

Michigan Longbow Association

xtrema312

Also what is the center cut on your bow?
1 Timothy 4:4(NKJV)
For every creature of God is good, and nothing is to be refused if it is received with thanksgiving.

Firefly Long Bow  James 4:14
60" MOAB 54@29 James 1:17

Michigan Longbow Association

BigJim

The 5575's are probably not too stiff and on top of that, you will require a slightly stiffer shaft to shoot the BigJim broadheads due to there extra large size.

If you haven't figured out what you need, feel free to give me a call and I will help you.

thanks,bigjim
http://www.bigjimsbowcompany.com/      
I just try to live my life in a way that would have made my father proud.

Blaino

Ok Jim I went back to my full length shafts yesterday and you were right.  They were very close bareshafting them. Cut 1/2" off and put the BIG 3 on along with some 5" feathers to take a look..... after about 10 shots with it I have a fist size hole in my Block target!!!!
"It's not the trophy, but the race. It's not the quarry,
but the chase."


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©