I shoot 28.5 inch MFX 500 arrows with 75 gr insert and 175 - 200 gr heads out of my 52@27 Whip.

What's the centre cut on a lynx?

That is a sweet lookin bow TxAg.  Glad to hear you pulled the trigger on it.  

Regarding shafts, I'm shooting GT's out of mine.  

I'm shooting GT 15-35s with 200 up front for my 48#@29.   I shoot 35-55s with 250 up front for my recurve 55@29.  Finally I shoot 55-75s with 350 upfront for my 61@29 LB limbs.  All shafts are 30 inches  (or just shy of it).

GTs seem to shoot stiffer for me.  I tuned some Beemans but shot them less consistently out of my Lynx.  

My word isn't gospel, so certainly take it with a grain of salt.

Thats some fine looking zebra wood!  Lots of good advice on here you will get it dialed in. Good luck with it this year.

I'm shooting cx Heritage 150's, 30.5" long with 200 up front, 53 lbs. @28", I draw 30".  

The center cut on a lynx is slightly past center, but not by much.

Very nice looking bow you have there sir!      

Thanks for the insight guys. I ordered a half dozen 400s to tinker with.

Ordered a new tolke 56" chinook last week and it has the zebra wood limbs very nice!!!

Beautifull bow, enjoy it !

i shoot mine (58#@ 31", shot at 31,5") with GT trad 75-95 full length, 50 gr long aluminium insert and 250 gr point. I changed the shelf material for a thick leather one but let the window leather plate and switched for an SBD 10 strand string with wool wrap.

that zebra is awesome!

QuoteOriginally posted by TxAg:
Thanks for the insight guys. I ordered a half dozen 400s to tinker with.

shot some easton st excel 400s today using a standard 20gr insert and 175gr head. 30.5" long totaling 488 gr.  they flew much better....i'd like to go heavier, though.

i should be receiving some 200gr and 225gr heads shortly and will give those a go.

bow is currently at 1/2" nock and 7 1/4" brace

WOW that is a absolutely beautiful. Bow