3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Grain Runout ?

Started by geno, August 18, 2007, 11:52:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

geno

Can someone give me a good site to go to to picking out the right shafts..I am not sure what grain runout is and didnt know about the rift direction until I read starkmans post..For my saftey sake  :D  thank you
Geno
"Learning how to shoot a bow is easy if you learn the right way"..Howard Hill

SlowBowinMO

I think is was Vermonster that posted some real good pics of arrow grain run out a while back.  I'll see if I can find them, if not you might try a search.


EDIT
I can't find them, I did save the pics they were great, but I don't have them on this 'puter.
"Down-Log Blind at Misty River"

jacobsladder

i think it was gene (scattershot) thread ..i looked for them and found the thread but they were x'd out or deleted.... geno...check with scattershot he has some good pics...
TGMM Family of the Bow

"There's a race of men that dont fit in, A race that can't stay still; So they break the hearts of kith and kin, And they roam the world at will"  Robert Service

SCATTERSHOT

I have deleted those pics from my file, but I'll see if I can get some back up for you. Basically, runout is where the grain of the shaft runs out along the side, resulting in V's when viewed from the top or bottom of the shaft, like this >>>>>>>>>>. They are considered acceptable by shaftmakers and sold as premium shafts if the runout occurs in more than 22", I believe.

The V should point toward the front of the arrow on top of the shaft when nocked.
"Experience is a series of non - fatal mistakes."

geno

does that mean a 6" run of  >>>>>>>> in the middle is where you would get into trouble. How about this >>>> <<<<<   It looks like all my arrows are backwards.  :knothead:  the more I learn the less I know...  :confused:
"Learning how to shoot a bow is easy if you learn the right way"..Howard Hill

vermonster13

Not really high quality shafts if they look like that geno.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

aromakr

geno:
follow one of those "V" back into the shaft, you will notice that it eventually ends up on the other side of the shaft, that is called run-out, it means that the grain is not running parallel with the shaft. If it occures in less that 20 or so inches, THOSE SHAFTS ARE DANGEROUS !!!!!!!!! In the old days, 30's-60's any run-out was considered less than premimum, and run-out that occured in less than 20 or so inches NEVER reached the arrow shaft consumer.
Bob
Man must "believe" in something!  I "believe" I will go hunting-----

SCATTERSHOT

Here are some new pics. The top arrow in both pics is an ash shaft with severe runout, the bottom shaft is a cedar with almost none. That's what you're looking for.      
"Experience is a series of non - fatal mistakes."

geno

there goe at least 1/2 my arrows. Short term..  :mad: .
   
     Big picture, thank you guys
G
"Learning how to shoot a bow is easy if you learn the right way"..Howard Hill


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©