I have a Martin Hunter 60lbs @ 30" and for years a have used 2216 cut at 30 1/4" with bear razorheads and four 4" feathers off the shelf, they fly OK, but a lot of people tell me it is the wrong shaft, they recomend 2117, 2018, etc. It is hard to locate the old Easton shaft selector, the new one has different numbers now, any sugestions?

If your draw length is 30" they should work.You might want to try some at around 31.5"
2117 should also work.
Try some and see.

John

2315's will work fine out your setup. They are not too stiff.

I think a 2117 would work if you are not shooting heavy point weight.