I draw 30" and shoot a Axis N-Fused 340 shaft tipped with a 250 grain Terminator  . . . cut to 31". My bow is a 58 pound Tall Tines recurve.

Beman MFX Classic 340s, 30,5" long 50 grain Insert, 150 grain tip, 1/2" Alu footing front, 1/4" footing backend 4x4" feathers

out of a 57#@30" Lee TD LB;

I draw an honest 30.5  and I shoot carbon express 150 heritage out of a 57 lb reflex deflex longbow.  They fly very well for me.  I also shot the same arrows out of a very short,(read 47 inch hybrid bow)  pulling 64 lbs and they shot equally well if not better.

Carbon Express Maxima 350's (the all black woven ones, not the half black half camo ones) with 100 grain brass insert and 250 grain points or broadheads work out of my 62# @ 28" Black Widow and Jack Howard recurves (results in a 610-620 grain arrow I think).  You are a hair longer draw than me so I would say the same setup may tune or you may need to drop back to a 200 grain point.
That same set up did not tune to my satisfaction out of my 55# Jack Howard and I had to drop back to the Carbon Express 250's with a 50 grain brass insert and 250 grain points (results in a 550 grain arrow I think).  
Unfortunately that means two sets of different arrows and they are spendy, but hold up better than other carbons I have tried.

29" draw on a 57# MOAB hybrid.  I shoot the CX 250 with 150 grain points, no insert weight and a 3gpi full length weight tube.  Gets me about 540 grains of arrow and very, very good arrow flight.

Carbon Express 6075 30.5" 58-63#

Finally Perfect flight!!    I ended up with 31"  Carbon Express Heritage 350    100gr brass insert, 175gr. point      680grain total

shot out of my 58@28 62" MOAB    drawn to 29"

57#,29.5" G.T.55/75 W/275 gr. up front

I draw 29.5 and shoot beman 400's with 100 grain brass inserts and 125 grain field points. They fly great.

Yup, need to what bows you are shooting. Guys can list all day but if you are not shooting exactly what bow they are it will do you no good. Shawn