Arrow tuning questions

[DXH]

I've never gotten into the "science" of tuning arrows
I'll be shooting carbon arrows out of a 60# recurve with ~ 150 to 160 grain point . My draw length is 27"

What length shaft do i need to start with before I start trimming length down

[VA Elite]

my guess is to start with full length shaft and go from there

Originally posted by VA Elite:
my guess is to start with full length shaft and go from there

Not knowing any other info, I'd say that was a good guess!

Bisch

[Arctic Hunter]

Originally posted by VA Elite:
my guess is to start with full length shaft and go from there

X2

Ken Beck's method for tuning arrows has always worked for me.

[DXH]

Arctic hunter do you have the link to the ken beck method

[Producer]

If you are drawing 27" you would be around 57lb. If you are shooting say a GOLD Tip Traditional in the 400 hundred class with 160 up front,full length which I think now is 30.5 inches you might fine that it is just fine. If the spine is weak just reduce weight up front or cut a quarter inch at a time off. Some will say an eighth inch at a time. My bow at 57lbs works great with that combo.

[John3]

Easy to find... YouTube and search for ken beck arrow tuning or I know this video is on the Black Widow web site..

[DXH]

Producer, my bow was tillered to be 60# @27" if that matters

[Arctic Hunter]

Yeah. Just go to black widow's website and go to videos on the far right.

[Brianlocal3]

Here ya go
I like kens method also

http://youtu.be/BSJ6-HjPMTM

[Roy from Pa]

Another good arrow tuning link.

http://www.acsbows.com/bowtuning.html