This has already been said but the most important part of arrow and bow set up is perfect arrow flight from a properly tuned bow and a razor sharp broadhead. Then perfect shot placement.
All that being said there are things that bowhunters control that improve their ability to take game. FOC arrows are great but they are not as important as just an arrow that has as total weight of 650 grains or more. Arrows of 650 grain total weight or more apt to penetrate bone if bone is accidently encountered. FOC does not contribute to bone penetration however high FOC increase penetration in soft tissue.
The ideal situation is to have the best of both worlds and combine a heavy arrow (650+) with a high percentage of FOC. The categories of forward of center, commonly referred to, are set out by Dr. Ed Ashby
Normal FOC = 0 percent to 12 percent
High FOC= 12 percent to 19 percent
Extreme FOC =19 percent to 30 percent
Ultra Extreme FOC = more than 30 percent
Using wood arrows it become very hard, if not impossible to reach Ultra EFOC.This is mainly because it hard to find stiff enough arrows and heavy enough glue on broadheads. The possibility may exist with products like woody weights and footed shafts or a combination of all. Most archers using arrows in the higher FOC categories EFOC and UEFOC are using carbon or aluminum shafts with a combination of heavy broadheads, screw on adapters and/or footing.
It is common for bowhunters using wood arrows to attain FOC in the 15% to 25 % range. These ranges are relatively easy to reach
Heavy arrows are not hard to attain and being one of the important factors in arrow design It and bowhunters should stive for them Itis true heavy arrows reduce trajectory but they really only have a marginal effect on shots less than 30 yards. The benefits and arguments for heavy arrows mostly outweigh the distance/trajectory argument.
To some it sounds complicated and not worth it because they are comfortable with their set up and do not see the need on deer size game. I would dispute that point just through my own experience. Over the last 35 years of hunting with traditional and primitive equipment I have made less than perfect shots (not very many LOL)

on deer hitting the shoulder (scapula) and had next to no penetration or even had arrows bounce out. Would I have planned that, no, but STUFF does happen. Maybe a heavy arrow would not have changed the outcome in all cases but I am positive it would in a lot of them.
I am not knocking anyone and their beliefs .We all formulate our philosophies and practices from our experiences. I shot the same arrow spine for over 20 years. I followed the rule of thumb use an arrow spine 10 lb over your longbow weight. During that time I never bare shafted my arrows to see if the spine was correct for my bow. For the most part my arrows flue true.If they did not I would take up or let out a few twist in the string. If that did not work I would put bigger feathers on the arrows

Since those days I have experience the effects of heavy arrows and foc and would not consider going back to my old ways .Yes it takes work and sometimes it is costly as new arrow might be needed .
Knowing what we know now about arrow weight and foc why would one not incorporate that knowledge into their arrow set up.??
Some things traditional archers are slow to embrace but we have accepted fiberglass backing on bows, different string materials, high tech core materials and stressed bow limb designs Yes there are people uneasy with these changes just as they are with arrow and broadhead design changes.
TRY IT ! Heavy arrows (650gn+) .Work some foc in there if you can! Like many others you might like it and see the benefits.
