longbow brace height??

[brumski]

hi guy's, i've bought a smick verna longbow, but no brace height guide lines came with the bow!! i have it at 8 1/2 inches at the mo, is that about right?? (samick verna 64" 50# @ 28")

regards brumski

[Orion]

I'm not familiar with that bow, but it sounds high to me.  If it's a straight grip, 6 1/2 to 7 inches would be more appropriate; pistol grip, maybe 7 1/2.

[bolong]

I shoot a 64" Crow Creek longbow 48# at 29" and my brace height is 6 5/8". Works the best on my bow.

[SCATTERSHOT]

I believe that the Verna is a R/D longbow, and I'd be looking at about 7 1/2" to start with.

[Flatshooter]

Generally, brace height for most longbows fall in the range of 6 1/2 to 7 3/4" on the high end. Recurve bows brace higher in the 7 1/2 to 8 5/8"  range. I've never heard of a longbow bracing in the mid 8"s.

[brumski]

thanks, guy's, what a mine of info this forum is!!!


brumski

[NorthernCaliforniaHunter]

Whoa my brace height is WAY too high then...  

[brumski]

hi guy's, i've got my brace height down to 8", but there's very little scope to go much lower, as there's hardly any twist left on the string!!
is 8" ok?.

brumski

[bigiron]

I remember an ad for the verna a while back that said: with 6" brace it will reach speed of over 180fps @ 50#& 28": so you can start at 6" if you've a mind to. but sounds like you better get a longer string.