Arrow Wraps

[BAbassangler]

Anyone ever see extra long wraps, like 14" or so?
I ask because I have shafts that have painted logos, and spine with 250 points.  Clean off the paint off and they spine with 235.  I like the 250's and the paint is not terrible, but doesn't line up with my spine/nock tune.  Just trying to keep the same weight/spine.

[M60gunner]

No I haven't but buying the wrap material (Oracal 651 or 751) buy the roll you could cut pieces 14" long. Then cut to width.

[BAbassangler]

Thanks much, Mr M60.

[Mint]

I use 1" reflective tape that i get from Amazon and make it as long as needed

[BAbassangler]

I use 1" reflective tape that i get from Amazon and make it as long as needed

That's worth a shot, easier that cutting to width.  Any problem with edges or corners rolling up? Lay pretty flat at the overlap?

[EHK]

Onestringer has wraps up to 10".  Might be worth trying them?

[Mint]

I use 1" reflective tape that i get from Amazon and make it as long as needed

That's worth a shot, easier that cutting to width.  Any problem with edges or corners rolling up? Lay pretty flat at the overlap?

I clean the shaft with acetone or denatured alcohol and haven't had one problem and they hold like iron. If you don't clean the shafts then i was having problems.

[EHK]

I use 1" reflective tape that i get from Amazon and make it as long as needed

Do you have a brand name or any more info you can share?  The reflective tape I see on Amazon all looks like it may be textured (could just be the way it appears in the pictures).  I'm guessing you have no issues with fletching sticking and staying in place? 

[Terry Green]

I have some 9 inch reflectives from Onestringer on a few dozen arrows.