Day Six broadheads

[kennym]

I shoot VPA 200 grain 3 blades , 1-1/8" cut , awesome blood trails. Also have a few 1 -1/4  200s they penetrate just as well and bleed just as well. I just like the longer ones.

As said you can make them really sharp. I black the edges and (now no gasping) mounted on an arrow, pull them from back to point lightly on my 6" fine wheel bench grinder . Watch the blackened edge and go slow. when you have it cleaned up, I have a handifile by Nicholson I think , use the single cut side, 3 light strokes,then 2 then one  barely touching the broadhead.

Shave in about a minute and shoots thru deer into the dirt (usually)with 42-46 lbs

YMMV

[Iowabowhunter]

I ended up putting course to finer grit sandpaper on a 6" pvc pipe & sharpening that way. Just waiting on a piece of leather to come in the mail so I can finish stropping.

Tried out a new method of testing sharpness just with a piece of paper & I'm satisfied!

I know as a fact that the sharper I can get my heads the more animals will bleed. I wanted full confidence that the arrows I send @ animals are as sharp as I can possibly make them, mission accomplished.

Merry Christmas!

[Terry Green]

THE L T R HUNTS. We're mostly from 2:00 to 250 grains.

If anybody doesn't think that three blades work once again, here's a picture so that you will know that you have no standing on your claims.

[Terry Green]

3 blades are EASY to sharpen. Just drag them backwards on a stone or diamond rod. I use a diamond rod....

Wensel Woodsman....

[Terry Green]

3 blades are EASY to sharpen. Just drag them backwards on a stone or diamond rod. I use a diamond rod....

Wensel Woodsman....

[Terry Green]

Three blade....

[Iowabowhunter]

Three blade....

Such a cool hunt, incredible animals!

Excited to put these VPA's to good use now that i've figured out how to get them as sharp as possible!

[Roger Norris]

For what it is worth.......I am 100% convinced that the rubber band test is more applicable to what we do than the hair shaving test.