3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

ILF limb question.

Started by rbcorbitt, April 11, 2013, 08:39:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rbcorbitt

I keep thinking I have this whole ILF thing figured out, and then I'm humbled, yet again.

15" Morrsion riser coupled with Morrison B longbow limbs will give what length bow?

Also, limbs rated 51# @ 25".  My draw is 29 1/4".  Approximately what will be weight at my lenght?

Thanks!
"I would rather be amongst forest animals and the sounds of nature, then amongst city traffic and the noise of man" - A.D. Williams

Razorbak

56" length and roughly 63#draw weight
TGMM Family of the Bow

Shawn Leonard

I would add that with one of Bobs bows at 56"s you will gain 3# per inch past 28"s and maybe 29"s but 4#s or more past that. I would guess 64-65#s. Shawn
Shawn

Razorbak

I think you might be pushing it for draw though and I understand correctly Bobs riser's and limbs pretty much stay the same weight + or - 1# but if your pulling to 29" then of course a weight gain specially since they are rated for a 25" draw..I was looking at some of his LB limbs A and B lengths that were rated for a 26" draw and he recommended against it for my 27" draw and 15" riser
TGMM Family of the Bow

Steelhead

I would probably back the bolts out maximum at your draw length on that short of bow.It will probably feel best thier for you.

wingnut

Yep you do have a very long draw for that bow.  You should give Bob a call and get his input before you end up eating the limbs.

Mike
Mike Westvang


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©