New VPA Custom Shop 1/4" cut 3 Blades

[rayzor150]

We have just expanded our VPA Custom Shop 1 1/4" cutting diameter 3 Blade line up to include a 150gr vented and a 175gr nonvented models.  The ratio/cutting angle was carried over from the extensively tested 1 1/8" cut 150gr 3 Blade resulting in a length on both new models at 1.85". Pricing will be $49.95 per 3 pack.

All VPA broadheads are Precision CNC machined in one piece from high carbon tool grade steel.  They are then heat treated and through hardened to 48-54 Rockwell depending on the model. A ultra slick PTFE coating is applied for improved penetration and corrosion resistance.  100% Spin tested for flight stability.

Limited time introductory offer:  10% off 1 pack or 15% off 2.  Shipping is free to the US.  Discounted elsewhere.

They are not yet on the website or in the rayzor-vpa.com webstore.  Please email me at ray@vparchery.com or rayzor@att.net if interested.

[Dirtybird]

Glue on or screw?

[rayzor150]

Sorry I forgot to post they are both screw on.  We have a few of the 200 grain glue on 1 1/4" cut that we previously released.

[rayzor150]

Also have a few of the 250gr 1 1/4" left.

[Skipmaster1]

Are there 250 grain screw in 1 1/4" heads left?

[Guru]

Looks like, even though maybe for a limited time, these are a great addition to the VPA line-up!!

These 1 1/4" bh's are my favorites...everything one could ever want in a broadhead...I luv'um!

Ray, save me some of those 200gr. glue-on's  and 250 screw-in's bud    

Oh, and I also have some pix to send you...and hopefully more after next weekend    

[Iowabowhunter]

Sweet! I should have waited and saved up for these

[Goshawkin]

Originally posted by Mike Walker:
Any chance of making some glue-on's?

Figured the vented would come out close to 125 grain........

I'd be interested in these as well.

[rayzor150]

Maybe well make a lighter 1 1/4" glue one at some point.  The only weight we make in glue on 1 1 /4" at the moment is 200gr.  I have several packs of them left out of the last run.

[rayzor150]

We're down to about 10 packs of the first run of the 150s.  Maybe 20 packs of the 175s.

I also have several packs of the 200 glue on and the 250gr screw in 1 1/4" cut models.  I have a 2 pack discount on them too.  

Email me at rayzor@att.net or ray@vparchery.com if interested.  Neither deal is set up in the webstore.

[Bowhunter4life]

I too love the 250 grain 1 1/4" Terminator screw-in, but I've already got quite a few...  

Is there any R&D on 1 1/2" wide heads?  Both the Terminator and Penetrator?  The Big Jim 300 grain is great at 1 1/2", but a little heavy for some of my bow setups.  And, I've had some of the Penetrators, but they were just to narrow for my liking in a 2-blade.  Would love to see them in 1 1/2" or even 1 3/4", 250 or 300 grain.

[WESTBROOK]

For those wondering about the 200g glue on, here is a comparison photo with  125 original Woodsman and a 160 Snuffer. The 250 screw in is the shame dimension as the 200 glue-on.

Eric

[rayzor150]

Pretty sure its 2 1/2" w/.040" blades.  I'm traveling and should be back in town tomorrow evening.  I'll measure and post if I don't run into any delays.

[Fletcher]

I really like the glue on 200's.  Rayzor, pls PM me the "good deal" info.  Thanks!

[daveycrockett]

e-mail sent for a few paks.

[rayzor150]

Just measured them.  They are 2 1/2"  blades (2.590" overall including stub).  .040" blades.

[Guru]

The two "new" 1 1/4" sizes are in the middle...
 

They look great and will fit the bill perfect for someone looking to continue shooting the highest quality bh's that VPA is known for, but wants to go wider and still keep their bh weight down...no doubt another winner for VPA!

[rayzor150]

Thanks for posting the pic!  I'm TG Photo Posting Challenged.