What brand/size lighted nock fit AD Traditionals

[Ray Hammond]

I know someone here has already figured it out- I want to try them

[joe skipp]

Ray...I glued on 9/32 snap on nocks over my adapters. You can cut off the tip and use Easton "G" nocks. I prefer the snap on 9/32....

[Bud B.]

I did some searching Ray and found this on 3Rivers' site:

Q:
Will any of these lighted knocks fit my "Arrow Dynamics-Traditional 55-70# tappered shaft arrows?
Asked on 12/13/2011 by Anonymous

Know the answer? Answer this question

1 answer

   Staff Reviewer

   A:
   No, the Arrow Dynamics shafts taper back to 1/4". All of these nocks will be too large. I do not know of anyone that makes a lighted nock for Arrow Dynamics shafts.

   Answered on 12/14/2011 by Justin from 3Rivers Archery

[Hawkeye]

You can get Nockturnal Lighted Nocks in "G" size, and use Easton Uni-bushings.  You would have to lightly sand the Nocturnal shaft ridges to get it to slip inside without undue pressure.

[Danny Rowan]

Ray,

Daryl nailed it. The Nocturnal G with uni bushings for the AD shafts. I have some and they work great. Raptor has the uni bushings for the AD shafts and you can order the Nocturnals from the Nocturnal web site.

[Terry Green]

Gary Hunsicker
3935 N.W. Menoken Rd.
Topeka, KS 66618-4514
785-246-4033


Call Gary...he has tried them ALL, ...he's an a Sponsor here that sells ADs....lease what was out last time I asked about them.

[JamesKerr]

I have not heard of any lighted nocks that fit them.

[Ray Hammond]

I'm hoping to slip one of these in a Kansas buck in two weeks!

Thanks guys!

[joebuck]

firenocks Ray!  No switches or magnets.  IMO I think they are the best...Blue with clear nockmor red with red nock..Extra long battery and gravity activated...been shooting for 3 years ...They have nocks to fit ADs.     Good luck Kansas.

http://www.firenock.com/main.php?page=Productfitchart