A little help with Bear Take down.

[stabow]

First time owning a Bear take-down and I'm noticing a slight clicking sound on the upper limb when I draw and let the string back down. Everything looks good I removed the limbs and reinstalled a few times but still hearing it. Both limbs and riser are new. Haven't shot it yet because it's raining. Any suggestions what I could try?......stabow

[1/4 away]

stabow....PM sent.

[stabow]

I think I found the problem after putting some string wax on the connecting surfaces I notice the string wasn't tracking into the grove, after some adjusting I believe I have the problem corrected.
1/4 away got the PM thanks.....stabow

[dad]

Try putting two pieces of leather on the top of the limb tips fork.The back side of the limb that goes into the latch pocket I did this to both top and bottom and mine is quiet.

[stabow]

Had it out shooting today and everything seems good for now. I like the way it shoots. Don't know if it will be my Widow backup or my Widow will be my Bear backup.LOL......stabow

[stabow]

I think some of the problem is brace higth I need to keep it around 7.5 to 7.75 any higher than 7.75 the top limb  wants to twist which causes the string not wanting to track.......stabow

[JamesKerr]

The top limb should not be twisting at all just due to a higher brace height 7 & 3/4" isn't that high for a takedown recurve anyway.

[stabow]

7.75 it's ok 8 is when it showed a twist. Over the years I've had several bows that did this.......stabow

[hawkeye n pa]

Keep the limb sockets clean, I use bow a toothbrush and a Qtip.

[rjackson]

I shoot my Bear TD at 8 inch brace no twist at all. That seems strange to me about your twist in the top limb.

I love bear TD bows.

Randy

[RayMO]

Just got my new A riser and  no. One Limbs from 3 Rivers. I am totally empresses with this bow. Quite and fast feels great in the hand and the workmanship is top notch