3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Proper shooting tab sizing?

Started by Scott357, March 18, 2012, 11:27:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Scott357

Hello,

When I started shooting trad a few months ago I bought a cheap glove at the local shop. Now I want to try a tab. I am currently shooting 3 fingers under. I anchor by touching my right index finger to my right canine tooth and touching the index feather on the arrow to my nose.I am using a deep hook into the first joint of my fingers. If I go to a tab should it cover my fingers entirely or should the tips of my fingers be exposed so I can feel my tooth?

I am thinking about a Bateman, Black Widow or Eagle Flight tab.

Thanks
Scott.

JamesKerr

I like for my tab to leave a tiny bit of my finger exposed. I can feel my anchor better this way, and I don't get my lip chafed by the tab as I release.
James Kerr

Killdeer

If your tab is too long it will smack you in the face. Don't be afraid to trim it back a bit until you like it.

Killdeer
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Night Wing

In my opinion, tab size is very important. I order my tabs according to the length of my middle finger. My middle finger is 3 1/8" long. So, when I order a Bateman cordovan tab, I order size "small"
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

BWD

Never bought one I didn't have to trim a tad, because three to four sizes don't fit all just right.
"If I had tried a little harder and practiced a little more, by now I could have been average"...Me

The Whittler

I wear X Large gloves and my tab is a medium.

Killy is right about smaking your face. I grab the string with a deep hook and trim what sticks past my fingers a little at a time. Cut just a little as you can't put back  what you cut off.

HenrikBP

I'm currently testing out Bateman and BW  3-under tabs. Both a size "L"

Of the 2 the BW tab is bigger by enough that I can't get to my "tooth" anchor point, so, like others have already suggested, I'll be trimming it back.

The instructions from an Elite tab I tried mentioned using talc on the tab when shooting, and that after some shooting the "amount" of tab that is touching the string on release should become "outlined" and that this "outline" may guide how much you can trim it back. Never tried it myself, but sounded like an idea.

Henrik
Morrison 17" ILF riser w/ "long" foam core recurve limbs. 47# @ 28"
Morrison 15" metal riser w/ "Short" Max1 limbs. 45# @ 27"
Toelke Whip HS TD 58", 47# @ 28"
Martin Hatfield TD. 55# @ 28"

Scott357

I ordered an EFA cordovan 3 under tab last night. I hope it works out.


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©