Arrow cut off saw plans?

Stump73 · June 21, 2011, 10:18:00 AM

I've ordered a dozen carbon arrows and I would like to make my own arrow cut off saw. I was wondering if anyone had any plans to make one?I checked the search engine, the build along, and the how to forum but couldn't find anything on it.
Thanks Mike

bryan r · June 21, 2011, 11:17:00 AM

Mini table saw

Cheap and effective.

ishoot4thrills · June 21, 2011, 04:36:00 PM

Made out of scraps laying around my shed and a Sears Dremel type tool. I have used it many times and it works great.

Buckeye Trad Hunter · June 21, 2011, 04:52:00 PM

http://www.harborfreight.com/power-tools/cutoff-saws/bench-top-cut-off-saw-42307.html

PaddyMac · June 21, 2011, 05:03:00 PM

2x Buckeye Trad hunter. I have one. I had to rig a way to keep the blade from slipping, but it works pretty well.

BOWMARKS · June 21, 2011, 07:04:00 PM

I recomend the HarborFrieght saw also,cheap and very effective.

wihill · June 21, 2011, 10:23:00 PM

The HF Mini saw mounted on a piece of Uni-strut. Works great for me!

John Whitaker · June 22, 2011, 02:35:00 AM

Do you guys use the blade that comes with the Harbor Freight saws or do you get something else?

JWarnken · June 22, 2011, 03:06:00 AM

http://m1134.photobucket.com/albumview/albums/jbwarnken1/photo-1.jpg.html?newest=1&pbauth=1_uLEBonVPfaLdh1h3YMYz2QDHqhVCk9b0KGqqNcZLrUlOBYFDlNs1mRtF19XDb%2FYPfHGQGUNtT%2BrY5Umuo47d EiXOrTSZoPWU4%2BRwTtBRJB9D%2FsPvDRO%2B%2FK%2FJQVFl8JNVNb6G05t%2F9Uc2bXPFl%2F8e6R2aSWx71BP2S2ebk2CgBDc%3D
http://m1134.photobucket.com/albumview/albums/jbwarnken1/photo.jpg.html?newest=1&pbauth=1_uLEBonVPfaLdh1h3YMYz2QDHqhVCk9b0KGqqNcZLrUlOBYFDlNs1mRtF19XDb%2FYPfHGQGUNtT%2BrY5Umuo47dEi XOrTSZoPWU4%2BRwTtBRJB9D%2FsPvDRO%2B%2FK%2FJQVFl8JNVNb6G05t%2F9Uc2bXPFl%2F8e6R2aSWx71BP2S2ebk2CgBDc%3D

JWarnken · June 22, 2011, 03:15:00 AM

Above is pics of the one I made with the Harbor Freight saw I learned about on here. The arrow sits on a Dixon broadhead tuner. The yellow guides were bought at Lowes for a couple of $s. Very cheap saw that works well. Spendiest piece is the board (oak piece I had laying around). Needs one modification though. I have only cut bareshafts so far. Gonna try some fletched soon. Will have to turn the Dixon around for the fletch to clear.

JWarnken · June 22, 2011, 11:08:00 AM

Think I finally learned how link in pics all the way..

SlowArrow · June 23, 2011, 05:47:00 PM

That is a nice looking arrangement!