3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Nock Point

Started by Matt Fowler, August 11, 2010, 08:02:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Matt Fowler

Just curious. How high is your nock point? My hunting bow is at 1/2 in. Last night I was playin' around with an old Kodiak. The arrows were scrounged from various spots in the basement and not really matched to the bow. I ended up with a nock point at 3/4 in. I was just wondering how high you could go. The bow seemed to shoot just fine.

Whip

Mine generally ends up right around 5/8".  3/4" is not out of line, and if it shoots good there just stick with it.  But I would definately find a good set that are matched to the bow and start over before settling on it though.
PBS Regular Member
WTA Life Member
In the end, it is not the years in your life that count. It's the life in your years. Abraham Lincoln.

maxwell

5/8"  off a rest.  Works great for me.

Bowmania

Put a NP above and below, and I'll bet you move down from 3/4's.

Bowmania
I'm not putting up with this guys shit and dogging me.

Pete McMiller

Mine was at 1/2 to 5/8ths until I did a session with bare shafts and they showed me that I should be at 3/8ths.  All of a sudden my arrow flight improved   :rolleyes:
Pete
WTA
CTAS
PBS

Charter member - Ye Old F.A.R.T.S and Elkaholics Anonymous

MOLON LABE  [mo 'lon  la 've]

"That human optimism & goodness that we put our faith in, is in no more danger than the stars in the jaws of the clouds." ............Victor Hugo

JRY309

I shoot split finger and most are at 1/2",but my A&H likes 5/8".

Randy Koleno

I shoot three under and although it seems to go against general wisdom, I shoot my longbows best at 1/8th inch. This is with bareshafts and fletched. Surprised me.

Straight Shootin'

I always paper tune to see how my fletched shafts are flying and make appropriate adjustments but my nock point always comes out to about 3/8"...I also switched to two nock points which I tie on, one above and one below....
USN(RET) 1977-99
SOM 2001-2019

52" Fedora Stalker
Bear K-Mag x2
Predator Velocity 60"

"If you are not working to protect hunting, then you are working to destroy it." -- Fred Bear


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©