3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

rest-material

Started by 3Feathers, May 20, 2010, 07:39:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

3Feathers

Since you can,t get sealskin,whats the next best rest material that compares to sealskin??????
HH Cheetah 66in. 48lb at 25in.
HH HalfBreed 66in. 57lb. at 27in.
HH Wesley Special  56lb. at 26in..
HH Big 5          64lb. at 28in.
HH Wesley Special 55lb. at 28in.
HH Redman         60lb. at 28in.
Simmmons sharks
2016 Legacys

Soilarch

I've bought bows with leather, and what I believe was sealskin...never shot off of them very much though because...


I like self-stick velcro.  Buy the 2" wide roll at walmart and use the soft side

Not very primitive or exotic, but it can be done up to look pretty sharp and it's quiet, easy, cheap, and stays put.
Micah 6:8

Jack Denbow

Velcro for me too.
Jack
PBS Associate member
TGMM Family of the Bow
Life is good in the mountains

kevgsp


Bill Sant

3 feathers.....sent you a PM

Cherry Tree


Bill Sant

3 feathers.....sent you a PM

Hopewell Tom

How come you can't get sealskin? We're killing seals here on the East coast, I wonder what happens to the skins. I have a piece on my recurve which I like, but need to replace it do to poor application (mine). I like the look of the beavertail used by Abe Penner at CariBow. He has a grip with rest that looks very nice.
TOM

WHAT EACH OF US DOES IS OF ULTIMATE IMPORTANCE.
Wendell Berry

ron w

Some use calf skin, hair on.......never had it last to long, but it works. "Three rivers" did have it!
In the beginner's mind there are many possibilities. In the expert's there are few...So the most difficult thing is always to keep your beginner's mind...This is also the real secret of the arts: always be a beginner.  Shunryu Suzuki

Bill Skinner

I prefer leather to Velcro.  I have never had leather rip a fletch off.  Use the rough side for the rest and the slick side for the strike plate.  You can also get different thicknesses to tune the bow whe setting it up.  The strike plate, that is.  Bill

Yellow Dog

Industrial Strength Velcro. Install in two pieces, a side plate and just a little piece on the shelf. I leave about a 3/16th inch gap between the two for fletching clearance.
TGMM Family of the Bow

nightowl1

I use any type of leather or hair I want... If your nock point is right there should be very little wear. Maybe replace mine every two years or so at the most
Combo Hunter 46@28

I came from nothing and I brought it with me.

rambo1993

heavy duty Velcro and I cut mine to match how dale dye does the rests on his bows my bow is the exact same design so I named it trails end
Black widow 2007 PSR 2 T/D recurve 60" 48#@28"
Bear kodiak hunter 1pc. 50x#@28" 60" style recurve
Kota Prairie Swift 1pc. 53#@28" 60"
Samick Leopard recurve T/D 50#@28" 60"

sputterman

MEAT ON THE TABLE HORNS ON THE WALL!!!

cbCrow


Jeremy

Beaver fur that's been shaved down to the thickness of the bear hair rests.  Slick, durable and natural.  3Rivers carries it or you could check the   Sponsor\\'s Classifieds  

I've had some success with bark-tanned shearling that's been shaved down as well, but it can catch the fletching like velcro.
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Doc Pain

Velcro.  Cheap enough that I could replace it once a month if I wanted to and does not seem to be affected by moisture.
If it isn't life or death, it's no big deal.

tecum-tha

Dr. Scholl's self-adhesive Moleskin. Cheap and good.

carpenter

I like to use leather for strike plate and rest.
Howard Hill Wesley Special  HH Halfbreed


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©