Another tuning question and frustration

[JSimon]

Nock point is at 11/16". I didn't get a chance to shoot last night. Hopefully this weekend I can play around with it more. I swear when I bareshaft tuned these arrows a year ago I was getting the bare shafts and fletched shafts to impact at the same point, but I don't think I shot from more than 15 yards out. At full length the arrows were showing weak and I took a 1/4" off until they hit together (at 15 yards). The problem is no matter what I do, the arrows show weak (bare shafts impacting significantly right of my fletched shafts) at 20 yards, so something just isn't right. I fully expected to be able to build my rest out until the arrows showed stiff, or reduce point weight until they show stiff. I still need to remove the 100 grain inserts and install the aluminum inserts and see what those do.

If I wasn't getting the wear on my rest, I probably wouldn't even have thought twice about the tune of my arrows this spring. I may just put my rest back where it was, make sure my broadheads impact with my field points, put a piece of leather over the rest, and be done with it.