160 grain field tip

Mo. Huntin · January 20, 2009, 12:58:00 PM

Guys I can't find a 160 grain screw in field tip but I am finding a lot of 160 grain broadheads. I have not checked Custom King yet I can't from work. where can I get some?

Whip · January 20, 2009, 01:15:00 PM

3 Rivers carries 145 and 175 grain screw in tips. 15 grains is probably close enough that most guys wouldn't be able to tell the difference. But to match them up closer get a pack of the brass washers that they sell which go behind the point.

Mo. Huntin · January 20, 2009, 01:33:00 PM

Maybe I am blind but I still don't see screw in I see a 175. I see glue on ones. Is a gold tip 3555 a 5/16, 11/32,23/64? Maybe 175 will fly right with a 160 I don't know. Maybe 175 does not quite way 175?

Gatekeeper · January 20, 2009, 01:46:00 PM

Call Mike at The Knocking Point he is a sponsor here. His number is 913•774•7172

Here is a link to a page of his catalog with screw-in field points.

http://www.thenockingpoint.com/products2.htm#sfield

RLA · January 20, 2009, 02:16:00 PM

I got mine at Simmonssharks.com , they are$3.50 a dozen but the only place I could find any.

Cherokee Scout · January 20, 2009, 09:19:00 PM

Big Jim's has 145 and 175s. 229-420-5669

Tree man · January 20, 2009, 11:11:00 PM

Glue a 125 grain glue on onto a long aluminium screw in adaptor and you are there.

tukudu · January 21, 2009, 08:32:00 AM

Shoot a 175 you won't be able to tell the difference.

Whip · January 21, 2009, 09:14:00 AM

Sorry about my previous post saying they had 160 grain tips at 3 Rivers. I meant to type 175 - just a brain malfunction on my part. Looks like there are other options for you to order just what you need. That's good to know!

BobW · January 21, 2009, 09:18:00 AM

you could also use the PDP weight system to tune it in as you want....

TradOnly · January 21, 2009, 03:34:00 PM

I used my Dremel to remove some material from my 175's a little at a time until I reached my preferred weight of 165 grains.

cacciatore · January 21, 2009, 03:45:00 PM

I start from 175 and Trim some material since I get what I want

Mo. Huntin · January 21, 2009, 04:16:00 PM

thanks for the suggestions guys I appreciate it.

stykbow67 · January 27, 2009, 12:29:00 PM

You can also chuck them up in a drill and use a file to remove material. plus you can re-taper the shoulder for better transition to shaft if your shootin skinny carbons

Todweelz · February 02, 2009, 04:02:00 PM

send me a p.m. I've got a dozen and a half I could send you for cost of shipping [$2-$3] Todd