Single Grind Find

[Caleb the bow breaker]

This has probably been posted but while surfing the web this morning I discovered that Steelforce now makes a single blade head.

Dimensions: 2 Blade 1:3 cutting ratio. Available in a  screw in and glue on.  Just thought I would pass it along.  Have used Steelforce heads before and they are pretty sharp and believe they will resharpen for free.

Caleb

[Caleb the bow breaker]

Should have probably added a website.

http://www.steelforce.com/products/traditionalheads.html

[beachbowhunter]

I've looked at these a couple of times myself. The only concern I have is over the ferrule. It looks flimsy. I've seen no less than 4 SteelForce broadheads blow up on impact with bone. Otherwise I would grab some now.  To me the perfect broadhead would be a Magnus Stinger with a slightly longer, single grind blade.

[WidowEater]

looks like the tip could use some modification as well but nonetheless they do look appealing,  looks like you can only get heavyweights with steel adapeters into the glue on heads

[Bill Carlsen]

Actually they are working on a newer version using thick titanium for the blades and two different ferrules, aluminum and stainless steel, so that there will be a 200 grain and a 125 grain model. They promised to email me when they were available but I have not heard from them yet.

[Overspined]

I have had the blade bend on bone, and the ferrule as well. I will not use them.