Making broadhead adapters from fieldpoints?

[Alexander Traditional]

I like these adapters from Vintage Archery,they are the ones that make the Tuff Head. They are not cheap,but not out of this world either. My set up is about 325 or a little more. I can find broadheads or make some with steel adapters but I'm limited on what I can use. He has them in 150,175,and 200. These are 200 with a 150 grain Simmons for 350 grains. They give me a lot more options on broadhead use. I just put that second picture in there for reference. I guess you wouldn't have to do that,but there's a whole lot hanging off the front without support.

 

[Alexander Traditional]

[monterey]

Today I weighted some 38 special cases for blunts.  Held them by the rim with pliers and heated them with a torch and melted solder into them to about half full.

Different problem, but melting in should allow more weight in.