Getting a rubber blunt off

[John Krause]

Anyone have a good way to get a slip on black rubber blunt off a cedar arrow? It seems impossible w/o damaging the shaft.

Thanks for any ideas

[Longtoke]

dip it in real hot water
 love those rubber blunts

[Bud B.]

If you can get a syringe needle down in it with some dish soap and water, squirt a little down there. They are a pain to remove. You will have to break the vacuum seal.

[Red Beastmaster]

I always smear the shaft with string wax prior to pushing the blunt on. It still takes pliers to get them off but it's a lot easier.

[Pine]

2X with the really hot water .

[woodchucker]

1 pair of pliers + 1 bowl of Wheaties...
Eat the Wheaties, then take the shaft in your weak hand, grab the blunt with the pliers... And start pulling!!!!!

[frank bullitt]

Yep hot water.

Right now you could set them in a window, and let the sun heat 'em up!

[macbow]

Hey John just shoot at a squirrel if you hit the tree then the arrow will snap and the rest is easy. If you miss problem goes away.      

[fling]

What macbow said. that's how I do it.

[two4hooking]

If the blunt is on a broken shaft just smash it with a hammer and take out the pieces.

If you want the shaft intact use the Hot water method.

[John Krause]

Ron,

Very funny. I've done that a few times

[Archie]

I pull really really hard.