3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Repairing crack in riser

Started by indianalongbowshooter, July 08, 2015, 02:15:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

indianalongbowshooter

what type of syringe do you guys use that have repaired cracks with loc tite 420 use..are they the blunt tipped craft type sold on *****/amazon or are they the medical grade type with the sharp needle points to penetrate the crack..?
dean/indianalongbowshooter

elkken

I have only done it once but I used the nozzle on the bottle it came in, I was using super glue and it had a long tapered top. Worked just fine
Sometimes it's better to be lucky than good

TGMM Family of the Bow

Zradix

x2 cept I've done quite a few times.

You can kinda smear it in with finger too.... at the same time smoothing the bead.
you'll have to do some sanding and refinishing either way to make it really pretty again.
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

indianalongbowshooter

thanks ordered some loc tite 420 from the evil site, cheap 9.99 for a 1 oz. bottle..was told to get a diabetic syringe with super fine needle to get it way down in the crack. appreciate the help guys.
dean/indianalongbowshooter


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©