Buzz sound on my bow. Thoughts?

[Archer1019]

I have a 15" ILF Phoenix with long Dryad Epic RC limbs. Brace set about 7-7/8". Cat whiskers on the string. When I shoot in hear and feel some reverberation in the string.  My arrows are full length 3000 Vaporwoods with 125 gr tips for a total weight of about 450 grs.

Now with just the bow braced and I pluck the string like on a guitar, I hear the same buzzing sounds.  It sounds like a piece of metal lose that'soscillating. It's semi-faint but in hear it.  Checked all set screws and they're tight.  Any thoughts on this?

[cosgood]

My guess is the Catwhiskers. Mine make that buzzing sound too.

[LBR]

What kind of string material?  More than likely you are on the right track, just haven't found the loose screw yet.

[Archer1019]

Chad it's a 3 bundle xcel.  The buzzing was there pre cat whiskers.

[Archer1019]

As a thought...could brace height be a factor?  I thought I was at a good setting. I'd I bump it up or down and pluck the string like a guitar,  if set at a better brace, should the string still reverb?

[LBR]

Only time I've heard cat whiskers make noise is when they were left too long.  Properly installed, they work great.  SVL has made a literal fortune with rubber silencing products.

Brace height can be a factor.  Higher brace may help.

[Archer1019]

My whiskers are 1.5". I'll fiddle with the brace once rain ends here. Thanks

[warden415]

My guess would be too low of a brace height

[Cwilder]

Check all your set screws and check the limb bolt collars

[Archer1019]

Thanks guys.  Little noises annoy me. I've checked all set screws and collars. As soon as the waters recede, I'll give her a go.

[cch]

If you have a brass collar on the adjusting bolt make sure it is tight. You might have to put some Teflon tape on the threads to tighten it up.

[A.S.]

Originally posted by cch:
If you have a brass collar on the adjusting bolt make sure it is tight. You might have to put some Teflon tape on the threads to tighten it up.

Bingo, I think this is the answer.

[Archer1019]

The brass collars are threaded and I made sure they're snug. Water hasn't receded in the yard yet.  All these great suggestions that I'm itching to see the results.
Thanks!!