What Glue do You Use for Feathers on on Wraps??

[Terry Lightle]

we use Fletch Tite Platinum on wraps with no problems.

[monsterbuck]

Super glue gel. God bless.

[M60gunner]

Fletch Tite Plat, Saunders NPV and Gorilla glue in the blue topped bottle. Just did a few arrows with the Gorilla super glue. I have been super glue challenged ( more on me) but this bottle top was easy to work with.

[Slickhead]

x2 on FT platinum
actually creates a chemical bond melting the wrap

[Stump73]

Super glue gel

[TealCoin]

FT Platinum user here.  Never had an issue with wraps.

[Wapiti Chaser]

I use what One Stringer says to use Super Glue Gel . I use to use Fletch Tite Platnium but has sone react bad with reflective wraps. Once dry is was ok but before that it eating through the wrap.

[myshootinstinks]

The info below is from the "Arrows by Kelly" site.  Kelly retired several years ago but has built more arrows than anyone I know.  As you can see, the best glue to use depends on the finish used or the surface of the arrows.

 What glue should I use for nocks and feathers?
First off, the same type of glue is used for both. However, the type depends upon what type of paint is used, or the type of shafting.
• Wood shafts using gasket lacquer – use Duco Cement.
• Wood shafts using Bohning Lacquer – must use Fletch-Tite or Fletch-Tape.
• Wood shafts using enamel, polyurethane's, varethane's and water based paints – use Duco Cement.
• Aluminum shafts – use Fletch-Tite or Fletch-Tape.
• Fiberglass shafts – use Bond-Tite, Fletch-Tite or Fletch-Tape.
• Carbon shafts – use Bond-Tite or Fletch-Tape. Glues like Super Glue can also be used.

[Mr. fingers]

Another platinum vote here

[frassettor]

Fletch tight platinum

[1/4 away]

X2 for the Loctite.

[STICKBENDER98]

fletchtite platinum

[the rifleman]

Snow Crow---how to you apply the E6000?  My wife has a tube in her craft stuff, but the nozzle end is very wide.  I always like to use what we have...

[Robert Armstrong]

Fletch-Tite Platinum

[bigbadjon]

I did not see it answered on here so... Duco is not compatible with wraps.