Delta take-down quiver

[Wheels2]

I used to have a Delta quiver that had take-down brackets mounted the limb bolts.  I see they still make the quiver for the Bear bows.  I liked the distance between the hood and the gripper.  Does anyone know  of a source for the style that mounts under the limb bolts?

Thanks,
Bill

[Wheels2]

http://www.3riversarchery.com/Fred+Bear+Custom+Recurve+7-Arrow+Bow+Quiver_i3193_baseitem.html

Like this one, but the mounting bars extended around the front of the bow and were set at an angle to match the base of the limbs.

[slim_grim]

Eagle's Flight Archery could fix you up. You'd need a totem shaft and limb bolt kit. Don and Karen are some really nice folks and would be glad to talk to you.    

http://www.eaglesflightarchery.com/efa/quivers.html

[Wheels2]

I will give it a look as an option if i can't find a Delta.

[JimB]

I've made quite a few custom arms for Delta quivers,to get the degree of angle that I wanted as well as to keep the quiver closer to the bow riser.It is just a matter of buying some aluminum bar,1/8"x3/4",determinng the arm length etc,cutting and drilling a hole on either end,then painting.

You may want a little bit wider arm,to fit under the limb bolts but the principle is the same.